Intersil
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
ISL43L210IHZ-T
عرض التفاصيل جداول البيانات

ISL43L210IHZ-T

Product Overview

Category

ISL43L210IHZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and routing applications.

Characteristics

  • Integrated circuit
  • Signal switching and routing capabilities
  • High performance and reliability

Package

ISL43L210IHZ-T is available in a small outline package (SOP) format.

Essence

The essence of ISL43L210IHZ-T lies in its ability to efficiently switch and route signals within electronic devices.

Packaging/Quantity

This product is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Supply voltage: 2.7V to 5.5V
  • On-resistance: 0.6Ω (typical)
  • Off-leakage current: 1nA (maximum)
  • Bandwidth: 200MHz
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

ISL43L210IHZ-T has a total of 8 pins, which are configured as follows:

  1. Pin 1: VDD (Power supply)
  2. Pin 2: IN1 (Input 1)
  3. Pin 3: IN2 (Input 2)
  4. Pin 4: GND (Ground)
  5. Pin 5: COM (Common)
  6. Pin 6: NO (Normally Open)
  7. Pin 7: NC (Normally Closed)
  8. Pin 8: VSS (Ground)

Functional Features

  • Low power consumption
  • Fast switching speed
  • Wide operating voltage range
  • High signal integrity
  • ESD protection

Advantages and Disadvantages

Advantages

  • Efficient signal switching and routing
  • High performance and reliability
  • Low power consumption
  • Wide operating voltage range

Disadvantages

  • Limited bandwidth compared to some alternative models
  • Higher cost compared to certain alternatives

Working Principles

ISL43L210IHZ-T operates based on the principles of solid-state switching. It utilizes MOSFET technology to control the flow of signals between different paths within an electronic circuit.

Detailed Application Field Plans

ISL43L210IHZ-T finds applications in various fields, including but not limited to: - Telecommunications - Consumer electronics - Industrial automation - Automotive systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL43L210IHZ-T are: - ADG849 - MAX4617 - DG408

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Note: The content provided above is a general overview and may vary depending on the specific datasheet and manufacturer's documentation for ISL43L210IHZ-T.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ISL43L210IHZ-T في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of ISL43L210IHZ-T in technical solutions:

  1. Q: What is ISL43L210IHZ-T? A: ISL43L210IHZ-T is a dual SPDT (Single Pole Double Throw) analog switch designed for use in various technical applications.

  2. Q: What are the key features of ISL43L210IHZ-T? A: Some key features include low on-resistance, low power consumption, wide voltage range, and compatibility with both digital and analog signals.

  3. Q: What is the typical application of ISL43L210IHZ-T? A: ISL43L210IHZ-T is commonly used in audio and video signal routing, battery-powered devices, portable instruments, and other applications requiring signal switching.

  4. Q: What is the operating voltage range of ISL43L210IHZ-T? A: The operating voltage range is typically between 1.8V and 5.5V.

  5. Q: Can ISL43L210IHZ-T handle both digital and analog signals? A: Yes, ISL43L210IHZ-T is designed to handle both digital and analog signals effectively.

  6. Q: What is the on-resistance of ISL43L210IHZ-T? A: The on-resistance is typically very low, usually around a few ohms.

  7. Q: Does ISL43L210IHZ-T support bidirectional signal flow? A: Yes, ISL43L210IHZ-T supports bidirectional signal flow, allowing signals to be routed in both directions.

  8. Q: Is ISL43L210IHZ-T suitable for battery-powered devices? A: Yes, ISL43L210IHZ-T is suitable for battery-powered devices due to its low power consumption.

  9. Q: Can ISL43L210IHZ-T be used in high-frequency applications? A: Yes, ISL43L210IHZ-T can be used in high-frequency applications as it has a wide bandwidth and fast switching speed.

  10. Q: What package does ISL43L210IHZ-T come in? A: ISL43L210IHZ-T is available in a small 8-lead Thin Shrink Small Outline Package (TSSOP).