X5169V14I-2.7

Product Overview

Category

X5169V14I-2.7 belongs to the category of integrated circuits (ICs).

Use

This product is primarily used for electronic data storage and retrieval in various applications.

Characteristics

• Integrated circuit type: X5169V14I-2.7
• Operating voltage: 2.7V
• Package type: DIP (Dual Inline Package)
• Essence: Non-volatile memory IC
• Packaging/Quantity: Available in tape and reel packaging, with a quantity of 1000 units per reel.

Specifications

The specifications of X5169V14I-2.7 are as follows:

• Memory capacity: 16 kilobits (2048 x 8 bits)
• Operating temperature range: -40°C to +85°C
• Data retention: Up to 100 years
• Write endurance: 1 million write cycles
• Interface: Serial I2C (Inter-Integrated Circuit) bus compatible
• Low power consumption: Standby current of 1µA (typical), active current of 3mA (typical)

Detailed Pin Configuration

The pin configuration of X5169V14I-2.7 is as follows:

1. VCC - Power supply voltage
2. SDA - Serial data input/output
3. SCL - Serial clock input
4. WP - Write protect input
5. GND - Ground

Functional Features

• Non-volatile storage: X5169V14I-2.7 retains data even when power is disconnected.
• Serial interface: It supports easy integration into various systems using the I2C bus.
• Write protection: The WP pin allows for write protection to prevent accidental modification of stored data.
• Low power consumption: The IC operates with minimal power consumption, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

• High data retention and write endurance.
• Easy integration with I2C bus interface.
• Low power consumption extends battery life.
• Compact DIP package for easy mounting.

Disadvantages

• Limited memory capacity compared to other ICs in the same category.
• Not suitable for applications requiring larger storage capacities.

Working Principles

X5169V14I-2.7 utilizes non-volatile memory technology to store and retrieve electronic data. It employs an I2C bus interface for communication with the host system. The IC operates by receiving commands and data through the SDA and SCL pins, allowing read and write operations to the memory array. The WP pin provides write protection functionality to prevent accidental modifications.

Detailed Application Field Plans

X5169V14I-2.7 finds application in various fields, including but not limited to:

1. Consumer electronics: Used in smart TVs, set-top boxes, and audio systems for storing user preferences and settings.
2. Industrial automation: Employed in control systems for storing configuration parameters and calibration data.
3. Automotive: Integrated into vehicle electronics for storing critical information such as mileage, fault codes, and user preferences.
4. Medical devices: Utilized in medical equipment for data logging and storing patient-specific settings.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to X5169V14I-2.7 are:

1. X5169V14I-3.3: Operating voltage of 3.3V.
2. X5169V14I-5: Operating voltage of 5V.
3. X5169V14I-2.5: Operating voltage of 2.5V.

These alternative models provide flexibility in terms of operating voltage while maintaining similar features and specifications.

In conclusion, X5169V14I-2.7 is a non-volatile memory IC belonging to the integrated circuit category. It offers high data retention, easy integration with I2C bus interface, and low power consumption. While it has limited memory capacity, it finds applications in various fields such as consumer electronics, industrial automation, automotive, and medical devices. Alternative models with different operating voltages are also available for specific requirements.