Intersil
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
X9250US24Z
عرض التفاصيل جداول البيانات

X9250US24Z

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Potentiometer
  • Characteristics: Programmable, Non-volatile, 256 Taps
  • Package: 24-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Provides digital control of resistance in electronic circuits
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Resolution: 8-bit (256 steps)
  • Resistance Range: 0 to 10kΩ
  • Supply Voltage: 2.7V to 5.5V
  • Interface: Serial (SPI) or I2C
  • Operating Temperature: -40°C to +85°C
  • Non-volatile Memory: Stores wiper position during power-off

Detailed Pin Configuration

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. SDA: Serial Data (I2C interface)
  4. SCL: Serial Clock (I2C interface)
  5. CS: Chip Select (SPI interface)
  6. SDO: Serial Data Out (SPI interface)
  7. WP: Write Protect (optional)
  8. HIZ: High Impedance output
  9. A0-A7: Address inputs
  10. W: Wiper terminal
  11. B: Terminal B
  12. A: Terminal A
  13. VSS: Negative supply voltage
  14. VDD: Positive supply voltage
  15. NC: No Connection
  16. NC: No Connection
  17. NC: No Connection
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection
  21. NC: No Connection
  22. NC: No Connection
  23. NC: No Connection
  24. NC: No Connection

Functional Features

  • Programmable resistance allows precise control in electronic circuits
  • Non-volatile memory retains wiper position during power-off, ensuring consistent settings upon power-up
  • Serial interface (SPI or I2C) enables easy integration with microcontrollers and digital systems
  • Wide operating temperature range makes it suitable for various environments
  • High resolution of 8-bit provides fine-grained adjustment capabilities
  • Low supply voltage requirement allows compatibility with a wide range of systems

Advantages and Disadvantages

Advantages: - Precise and programmable resistance control - Non-volatile memory for retaining settings - Easy integration with microcontrollers - Wide operating temperature range - Fine-grained adjustment capabilities - Compatible with various systems

Disadvantages: - Limited resistance range (0 to 10kΩ) - Requires external power supply

Working Principles

The X9250US24Z is a digital potentiometer that utilizes integrated circuit technology to provide digital control of resistance in electronic circuits. It consists of a series of resistive elements connected between the terminal A and terminal B. The wiper terminal W is used to select the desired resistance value by adjusting its position along the resistive elements.

The resistance value is controlled digitally through a serial interface (SPI or I2C), allowing precise adjustments to be made. The non-volatile memory ensures that the wiper position is retained even when power is removed, providing consistent settings upon power-up.

Detailed Application Field Plans

The X9250US24Z digital potentiometer finds applications in various fields, including:

  1. Audio Equipment: Allows volume control and tone adjustment in amplifiers, mixers, and audio processors.
  2. Industrial Automation: Provides precise resistance control in industrial machinery and automation systems.
  3. Test and Measurement Instruments: Enables calibration and adjustment of test equipment such as oscilloscopes and signal generators.
  4. Communication Systems: Used for gain control and impedance matching in RF amplifiers and transceivers.
  5. Automotive Electronics: Allows adjustment of parameters in automotive systems like climate control and audio systems.

Detailed and Complete Alternative Models

  1. X9251US24Z: Similar to X9250US24Z, but with 128 taps instead of 256.
  2. X9252US24Z: Higher resolution digital potentiometer with 10-bit (1024 steps) resolution.
  3. X9253US24Z: Digital potentiometer with logarithmic taper for audio applications.
  4. X9254US24Z: Dual-channel digital potentiometer for stereo applications.
  5. X9255US24Z: Digital potentiometer with extended resistance range up to 100kΩ.

These alternative models offer different features and specifications to cater to specific application requirements.

Word count: 550 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق X9250US24Z في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of X9250US24Z in technical solutions:

  1. Question: What is the X9250US24Z?
    Answer: The X9250US24Z is a high-performance network switch designed for use in technical solutions.

  2. Question: What are the key features of the X9250US24Z?
    Answer: The X9250US24Z offers 24 ports, high-speed data transfer, advanced security features, and easy management options.

  3. Question: Can the X9250US24Z be used in both small and large-scale technical solutions?
    Answer: Yes, the X9250US24Z is suitable for both small and large-scale technical solutions due to its scalability and flexibility.

  4. Question: Does the X9250US24Z support Power over Ethernet (PoE)?
    Answer: No, the X9250US24Z does not support PoE. It is a non-PoE switch.

  5. Question: What type of network cables can be used with the X9250US24Z?
    Answer: The X9250US24Z supports Ethernet cables such as Cat5e, Cat6, and Cat6a for reliable connectivity.

  6. Question: Can the X9250US24Z be mounted on a rack?
    Answer: Yes, the X9250US24Z is rack-mountable, making it easy to integrate into existing infrastructure.

  7. Question: Does the X9250US24Z support VLANs (Virtual Local Area Networks)?
    Answer: Yes, the X9250US24Z supports VLANs, allowing for network segmentation and improved security.

  8. Question: Is the X9250US24Z compatible with other networking equipment from different manufacturers?
    Answer: Yes, the X9250US24Z follows industry standards and is compatible with other networking equipment.

  9. Question: Can the X9250US24Z be managed remotely?
    Answer: Yes, the X9250US24Z supports remote management through a web-based interface or command-line interface (CLI).

  10. Question: What is the warranty period for the X9250US24Z?
    Answer: The warranty period for the X9250US24Z is typically one year, but it may vary depending on the manufacturer or vendor.