Intersil
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
X9258US24ZT1
عرض التفاصيل جداول البيانات

X9258US24ZT1

Product Overview

  • Category: Electronic Component
  • Use: Digital Potentiometer
  • Characteristics: Programmable, Non-volatile, 256 Taps
  • Package: Surface Mount (SMD)
  • Essence: Provides digital control of resistance in electronic circuits
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resistance Range: 0 to 10kΩ
  • Resolution: 39.06Ω per step
  • Number of Taps: 256
  • Interface: Serial (I2C)
  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The X9258US24ZT1 has a total of 8 pins:

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. SDA: Serial data input/output for I2C communication
  4. SCL: Serial clock input for I2C communication
  5. A0: Address bit 0 for device addressing
  6. A1: Address bit 1 for device addressing
  7. WP: Write Protect pin for protecting the non-volatile memory
  8. H/L: High/Low pin for selecting the wiper position

Functional Features

  • Programmable resistance allows precise control over circuit parameters
  • Non-volatile memory retains settings even when power is disconnected
  • 256 taps provide fine-grained adjustment options
  • Serial interface enables easy integration with microcontrollers
  • Wide operating voltage range ensures compatibility with various systems

Advantages and Disadvantages

Advantages: - Precise and accurate resistance control - Retains settings without power supply - Easy integration with microcontrollers - Wide range of operating voltages

Disadvantages: - Limited resistance range (0 to 10kΩ) - Requires I2C communication for control

Working Principles

The X9258US24ZT1 is a digital potentiometer that replaces traditional mechanical potentiometers. It consists of a resistive element and a wiper that can be digitally controlled. The resistance value between the wiper and one end of the resistive element determines the output voltage.

By sending commands through the I2C interface, the wiper position can be adjusted digitally, allowing precise control over the resistance. The non-volatile memory ensures that the settings are retained even when power is disconnected.

Detailed Application Field Plans

The X9258US24ZT1 finds applications in various electronic systems where precise resistance control is required. Some potential application fields include:

  1. Audio Systems: Fine-tuning volume control and tone adjustments.
  2. Industrial Automation: Calibration of sensors and actuators.
  3. Test and Measurement Equipment: Programmable resistance for circuit testing.
  4. Power Supplies: Adjustable voltage regulation.
  5. Automotive Electronics: Control of lighting intensity or motor speed.

Detailed and Complete Alternative Models

  1. X9314WS24ZT1: Similar digital potentiometer with higher resistance range (0 to 100kΩ).
  2. MCP401X: Digital potentiometer series with SPI interface.
  3. AD8403: Digital potentiometer with multiple channels for simultaneous control.

These alternative models offer different specifications and features, providing options based on specific requirements.

Word count: 345 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق X9258US24ZT1 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of X9258US24ZT1 in technical solutions:

Q1: What is X9258US24ZT1? A1: X9258US24ZT1 is a specific model of digital potentiometer, which is an electronic component used to adjust resistance in circuits.

Q2: What are the key features of X9258US24ZT1? A2: Some key features of X9258US24ZT1 include 256 tap points, non-volatile memory, low power consumption, and I2C interface compatibility.

Q3: How can X9258US24ZT1 be used in technical solutions? A3: X9258US24ZT1 can be used for various purposes such as volume control, brightness adjustment, motor speed control, and sensor calibration in electronic devices.

Q4: Can X9258US24ZT1 be used in both analog and digital circuits? A4: Yes, X9258US24ZT1 can be used in both analog and digital circuits as it provides a digital interface while emulating the behavior of a traditional potentiometer.

Q5: Is X9258US24ZT1 compatible with microcontrollers? A5: Yes, X9258US24ZT1 is compatible with microcontrollers as it uses the I2C communication protocol, which is widely supported by microcontroller platforms.

Q6: Can X9258US24ZT1 replace mechanical potentiometers? A6: Yes, X9258US24ZT1 can be a suitable replacement for mechanical potentiometers as it offers advantages like smaller size, higher precision, and longer lifespan.

Q7: How do I program X9258US24ZT1? A7: X9258US24ZT1 can be programmed using the I2C bus interface. You need to send specific commands and data to set the desired resistance value.

Q8: Can X9258US24ZT1 store its settings even when powered off? A8: Yes, X9258US24ZT1 has non-volatile memory, which means it can retain its settings even when power is disconnected.

Q9: What is the voltage range supported by X9258US24ZT1? A9: X9258US24ZT1 supports a wide voltage range typically from 2.7V to 5.5V, making it compatible with various power supply configurations.

Q10: Are there any application notes or reference designs available for X9258US24ZT1? A10: Yes, the manufacturer of X9258US24ZT1 usually provides application notes and reference designs that can help you understand and implement the component in your technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and documentation provided by the manufacturer of X9258US24ZT1.