قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
X9428YV14IZ-2.7

X9428YV14IZ-2.7

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Potentiometer
  • Characteristics: Non-volatile, 10kΩ resistance, 256 positions, I²C interface
  • Package: SOIC-8
  • Essence: Adjustable resistor for electronic circuits
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Resistance: 10kΩ
  • Number of Positions: 256
  • Interface: I²C
  • Supply Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Package Type: SOIC-8

Detailed Pin Configuration

  1. VCC: Power supply input
  2. SDA: Serial data line for I²C communication
  3. SCL: Serial clock line for I²C communication
  4. GND: Ground connection
  5. A0: Address selection bit 0
  6. A1: Address selection bit 1
  7. WP: Write protect pin
  8. H: High voltage programming pin

Functional Features

  • Non-volatile memory: Retains settings even when power is disconnected
  • Digital control: Allows precise adjustment of resistance value
  • I²C interface: Enables easy integration with microcontrollers
  • Low power consumption: Suitable for battery-powered devices
  • Wide temperature range: Can operate in extreme environments

Advantages

  • Precise resistance adjustment
  • Non-volatile memory ensures settings are retained
  • Easy integration with microcontrollers
  • Compact package size
  • Wide operating temperature range

Disadvantages

  • Limited number of positions (256)
  • Requires I²C communication protocol support
  • Not suitable for high-power applications

Working Principles

The X9428YV14IZ-2.7 is a digital potentiometer that uses non-volatile memory to store its resistance settings. It operates by adjusting the resistance between its terminals based on digital control signals received through the I²C interface. The potentiometer's resistance can be precisely set to one of the 256 available positions, allowing for fine-grained adjustment in electronic circuits.

Detailed Application Field Plans

The X9428YV14IZ-2.7 is commonly used in various applications, including: 1. Audio equipment: Volume control, tone adjustment 2. Display devices: Brightness control, contrast adjustment 3. Industrial automation: Calibration, signal conditioning 4. Test and measurement instruments: Fine-tuning, calibration 5. Automotive electronics: Climate control, sensor calibration

Detailed and Complete Alternative Models

  1. X9428YV14IZ-1.8: Same specifications, but operates at a supply voltage of 1.8V.
  2. X9428YV14IZ-5.0: Same specifications, but operates at a supply voltage of 5.0V.
  3. X9428YV14IZ-10: Same specifications, but with a higher resistance value of 10kΩ.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the X9428YV14IZ-2.7 digital potentiometer, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق X9428YV14IZ-2.7 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of X9428YV14IZ-2.7 in technical solutions:

  1. Q: What is the X9428YV14IZ-2.7? A: The X9428YV14IZ-2.7 is a specific model or version of a component used in technical solutions.

  2. Q: What is the purpose of X9428YV14IZ-2.7 in technical solutions? A: The X9428YV14IZ-2.7 is typically used as a programmable digital potentiometer or variable resistor in various electronic circuits.

  3. Q: What are the key features of X9428YV14IZ-2.7? A: Some key features of X9428YV14IZ-2.7 include its programmability, non-volatile memory, low power consumption, and wide operating voltage range.

  4. Q: How is X9428YV14IZ-2.7 controlled or programmed? A: X9428YV14IZ-2.7 can be controlled using a microcontroller or other digital interface through its serial communication protocol.

  5. Q: What is the voltage rating of X9428YV14IZ-2.7? A: X9428YV14IZ-2.7 typically operates within a voltage range of 2.7V to 5.5V.

  6. Q: Can X9428YV14IZ-2.7 be used in both analog and digital circuits? A: Yes, X9428YV14IZ-2.7 can be used in both analog and digital circuits as a variable resistor.

  7. Q: Is X9428YV14IZ-2.7 suitable for high-precision applications? A: X9428YV14IZ-2.7 provides good resolution and accuracy, making it suitable for many high-precision applications.

  8. Q: Can X9428YV14IZ-2.7 be used in automotive or industrial applications? A: Yes, X9428YV14IZ-2.7 is designed to withstand harsh environments and can be used in automotive and industrial applications.

  9. Q: Are there any specific precautions to consider when using X9428YV14IZ-2.7? A: It is important to follow the manufacturer's guidelines regarding voltage limits, temperature range, and proper handling to ensure reliable operation.

  10. Q: Where can I find more information about X9428YV14IZ-2.7? A: You can refer to the datasheet or technical documentation provided by the manufacturer for detailed information about X9428YV14IZ-2.7, including its specifications, application notes, and usage guidelines.

Please note that the specific model number mentioned (X9428YV14IZ-2.7) is fictional and used for illustrative purposes. The answers provided are general and may not apply to a real product with that exact model number.