IXYS
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
IXGH10N100U1
عرض التفاصيل جداول البيانات

IXGH10N100U1

Product Overview

  • Category: Power MOSFET
  • Use: High power switching applications
  • Characteristics: High voltage, high current capability, low on-resistance
  • Package: TO-247
  • Essence: Efficient power management
  • Packaging/Quantity: Available in reels of 50 units

Specifications

  • Voltage Rating: 1000V
  • Current Rating: 10A
  • On-Resistance: 0.35Ω
  • Gate Charge: 45nC
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The IXGH10N100U1 follows the standard pin configuration for a TO-247 package: 1. Gate 2. Drain 3. Source

Functional Features

  • Fast switching speed
  • Low gate charge
  • Avalanche energy rated
  • Enhanced body diode dV/dt and di/dt capability

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Fast switching speed

Disadvantages

  • Higher gate capacitance compared to some alternatives
  • Sensitive to overvoltage conditions

Working Principles

The IXGH10N100U1 operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the conductivity of the device.

Detailed Application Field Plans

The IXGH10N100U1 is suitable for a wide range of high-power applications including: - Switched-mode power supplies - Motor drives - Inverters - Induction heating - Welding equipment

Detailed and Complete Alternative Models

  • IXGH10N120B: Similar specifications with higher voltage rating
  • IXGH12N100: Lower on-resistance with slightly higher gate charge
  • IXGH8N100D1: Lower current rating but lower gate charge

In conclusion, the IXGH10N100U1 is a high-voltage power MOSFET designed for efficient power management in various high-power switching applications. Its characteristics, functional features, and application versatility make it a valuable component in power electronics design.

Word count: 298

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق IXGH10N100U1 في الحلول التقنية

  1. What is the maximum voltage rating of IXGH10N100U1?

    • The maximum voltage rating of IXGH10N100U1 is 1000V.

  2. What is the maximum continuous drain current of IXGH10N100U1?

    • The maximum continuous drain current of IXGH10N100U1 is 10A.

  3. What type of package does IXGH10N100U1 come in?

    • IXGH10N100U1 comes in a TO-247 package.

  4. What are the typical applications for IXGH10N100U1?

    • Typical applications for IXGH10N100U1 include motor control, power supplies, and inverters.

  5. What is the on-state resistance of IXGH10N100U1?

    • The on-state resistance of IXGH10N100U1 is typically 0.45 ohms.

  6. Is IXGH10N100U1 suitable for high-frequency switching applications?

    • Yes, IXGH10N100U1 is suitable for high-frequency switching applications.

  7. Does IXGH10N100U1 have built-in protection features?

    • IXGH10N100U1 does not have built-in protection features and may require external circuitry for protection.

  8. What is the operating temperature range of IXGH10N100U1?

    • The operating temperature range of IXGH10N100U1 is -55°C to 150°C.

  9. Can IXGH10N100U1 be used in parallel to increase current handling capability?

    • Yes, IXGH10N100U1 can be used in parallel to increase current handling capability.

  10. Are there any application notes or reference designs available for using IXGH10N100U1?

    • Yes, application notes and reference designs for using IXGH10N100U1 are available from the manufacturer's website.