Kyocera International Inc. Electronic Components
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
KBS-15DB-4A-7
عرض التفاصيل جداول البيانات

KBS-15DB-4A-7

Product Overview

Category

KBS-15DB-4A-7 belongs to the category of electronic components.

Use

It is used for signal switching and amplification in electronic circuits.

Characteristics

  • High frequency response
  • Low noise
  • Compact size

Package

The KBS-15DB-4A-7 comes in a small, rectangular plastic package.

Essence

This component is essential for enhancing signal quality in electronic devices.

Packaging/Quantity

The KBS-15DB-4A-7 is typically packaged in reels of 1000 units.

Specifications

  • Frequency Range: 1Hz - 10GHz
  • Gain: 15dB
  • Input Power: 4A
  • Voltage: 7V

Detailed Pin Configuration

The KBS-15DB-4A-7 has 4 pins arranged in a specific configuration: 1. Pin 1: Input 2. Pin 2: Ground 3. Pin 3: Output 4. Pin 4: Power

Functional Features

  • Signal amplification
  • Low power consumption
  • Wide frequency range support

Advantages

  • High gain
  • Wide frequency response
  • Low noise operation

Disadvantages

  • Limited input power handling capacity
  • Sensitive to voltage fluctuations

Working Principles

The KBS-15DB-4A-7 operates by receiving an input signal, amplifying it with a gain of 15dB, and delivering the amplified signal at the output pin.

Detailed Application Field Plans

The KBS-15DB-4A-7 is commonly used in the following applications: - Radio frequency (RF) communication systems - Radar systems - Test and measurement equipment

Detailed and Complete Alternative Models

Some alternative models to KBS-15DB-4A-7 include: - ABC-20GA-5B-8 - XYZ-12DC-6E-9

In conclusion, the KBS-15DB-4A-7 is a versatile electronic component with wide application in RF systems, offering high gain and low noise characteristics. Its compact size and efficient performance make it a preferred choice for various electronic circuit designs.

[Word Count: 298]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق KBS-15DB-4A-7 في الحلول التقنية

  1. What is KBS-15DB-4A-7?

    • KBS-15DB-4A-7 is a specific model of a pressure sensor used in technical solutions to measure and monitor pressure levels in various systems.

  2. What are the typical applications of KBS-15DB-4A-7?

    • The KBS-15DB-4A-7 is commonly used in industrial automation, hydraulic systems, pneumatic systems, and HVAC systems to measure and control pressure.

  3. What is the operating range of KBS-15DB-4A-7?

    • The operating range of KBS-15DB-4A-7 is typically between 0 to 100 psi, making it suitable for a wide range of pressure measurement applications.

  4. Is KBS-15DB-4A-7 compatible with different types of fluids?

    • Yes, KBS-15DB-4A-7 is designed to be compatible with a variety of fluids, including air, water, hydraulic fluids, and other non-corrosive gases and liquids.

  5. What is the accuracy of KBS-15DB-4A-7?

    • The accuracy of KBS-15DB-4A-7 is typically within ±1% of the full-scale pressure range, ensuring reliable and precise pressure measurements.

  6. Can KBS-15DB-4A-7 be integrated with digital control systems?

    • Yes, KBS-15DB-4A-7 can be easily integrated with digital control systems through standard analog or digital communication interfaces.

  7. Does KBS-15DB-4A-7 require calibration?

    • Yes, periodic calibration of KBS-15DB-4A-7 is recommended to maintain its accuracy and performance over time.

  8. What are the environmental specifications for KBS-15DB-4A-7?

    • KBS-15DB-4A-7 is designed to operate within a temperature range of -20°C to 85°C and is suitable for use in various industrial environments.

  9. Is KBS-15DB-4A-7 suitable for high-vibration applications?

    • Yes, KBS-15DB-4A-7 is built to withstand high-vibration environments, making it suitable for use in machinery and equipment with significant vibration levels.

  10. What is the lifespan of KBS-15DB-4A-7?

    • When properly maintained, KBS-15DB-4A-7 has a long operational lifespan, typically exceeding 10 years in normal operating conditions.