Littelfuse Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
23012R1C2.75W
عرض التفاصيل جداول البيانات

23012R1C2.75W Product Encyclopedia Entry

Introduction

The 23012R1C2.75W is a versatile electronic component designed for a wide range of applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and detailed and complete alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Power regulation and control
  • Characteristics: High efficiency, compact design, precise voltage regulation
  • Package: Small form factor, surface mount technology (SMT)
  • Essence: Voltage regulator
  • Packaging/Quantity: Typically supplied in reels of 3000 units

Specifications

  • Input Voltage Range: 3V to 36V
  • Output Voltage: 2.75V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOT-223

Detailed Pin Configuration

  • Pin 1: Input Voltage (VIN)
  • Pin 2: Ground (GND)
  • Pin 3: Output Voltage (VOUT)

Functional Features

  • Voltage Regulation: Provides a stable 2.75V output voltage regardless of input variations
  • Overcurrent Protection: Safeguards against excessive current draw
  • Thermal Shutdown: Prevents overheating under high load conditions

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained designs
  • High efficiency minimizes power dissipation and extends battery life
  • Wide input voltage range allows for versatile applications

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • SOT-223 package may require careful PCB layout for heat dissipation

Working Principles

The 23012R1C2.75W utilizes a combination of internal feedback control and switching circuitry to maintain a constant 2.75V output voltage. When the input voltage fluctuates, the internal control loop adjusts the duty cycle of the switching circuit to ensure the desired output voltage is maintained.

Detailed Application Field Plans

This voltage regulator is well-suited for various low-power applications, including: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Embedded systems

Detailed and Complete Alternative Models

  • 23012R1C3.3W: Similar voltage regulator with a 3.3V output
  • 23012R1C5.0W: Variant with a 5.0V output for different applications
  • 23012R1CAdj: Adjustable output voltage version for flexibility

In conclusion, the 23012R1C2.75W offers a reliable and efficient solution for voltage regulation in low-power electronic systems, making it a valuable component in various industries and applications.

Word Count: 410

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 23012R1C2.75W في الحلول التقنية

  1. What is 23012R1C2.75W?

    • 23012R1C2.75W is a specific model or type of component, often used in technical solutions for its unique specifications and capabilities.

  2. What are the key features of 23012R1C2.75W?

    • The key features of 23012R1C2.75W may include its power rating, voltage and current specifications, physical dimensions, temperature range, and any special characteristics that make it suitable for certain applications.

  3. How is 23012R1C2.75W typically used in technical solutions?

    • 23012R1C2.75W can be used in various technical solutions such as power supplies, lighting systems, electronic devices, and other applications where its specific attributes are required.

  4. What are the recommended operating conditions for 23012R1C2.75W?

    • The recommended operating conditions for 23012R1C2.75W may include temperature ranges, voltage and current limits, environmental considerations, and any other factors that could affect its performance and longevity.

  5. Are there any safety precautions to consider when using 23012R1C2.75W?

    • Users should adhere to safety guidelines and standards relevant to the application and handling of 23012R1C2.75W, including proper insulation, protection against overcurrent or overvoltage, and compliance with regulatory requirements.

  6. What are the potential alternatives to 23012R1C2.75W?

    • Depending on the specific requirements of the technical solution, alternative components with similar or different specifications may exist. It's important to evaluate these alternatives based on the application's needs.

  7. Can 23012R1C2.75W be used in high-temperature environments?

    • The suitability of 23012R1C2.75W for high-temperature environments depends on its temperature rating and thermal characteristics. It's essential to verify its compatibility with the intended operating conditions.

  8. What are the common failure modes of 23012R1C2.75W?

    • Understanding the potential failure modes of 23012R1C2.75W, such as overheating, voltage breakdown, or mechanical stress, can help in designing robust technical solutions and implementing preventive measures.

  9. How can 23012R1C2.75W be integrated into existing technical designs?

    • Integration methods may include circuit design, mechanical mounting, thermal management, and electrical connections, all of which should be considered to ensure optimal performance and reliability.

  10. Where can I find detailed technical specifications and documentation for 23012R1C2.75W?

    • Detailed technical specifications, datasheets, application notes, and other relevant documentation for 23012R1C2.75W are typically available from the manufacturer's website, authorized distributors, or technical support channels.