Littelfuse Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SP1044-01WTG
عرض التفاصيل جداول البيانات

SP1044-01WTG

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates voltage for electronic circuits
Packaging/Quantity: Bulk packaging, 50 units per pack

Specifications

  • Input Voltage: 4.5V to 18V
  • Output Voltage: 1.25V to 16V
  • Maximum Output Current: 5A
  • Dropout Voltage: 0.5V at 3A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Overcurrent protection
  • Fast transient response

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact TO-220 package

Disadvantages: - Higher cost compared to traditional linear regulators - Requires heat sink for high current applications

Working Principles

The SP1044-01WTG is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage or load conditions. It achieves this by using a feedback control loop to adjust the output voltage.

Detailed Application Field Plans

The SP1044-01WTG is suitable for various applications including: - Power supplies for industrial equipment - Automotive electronics - Battery-powered devices - Audio amplifiers

Detailed and Complete Alternative Models

  1. LM7805: Traditional linear voltage regulator with similar specifications
  2. LM2940: Low dropout voltage regulator with comparable performance

Note: The alternative models listed above are provided as examples and may not be direct substitutes for all applications.

This information provides a comprehensive overview of the SP1044-01WTG, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SP1044-01WTG في الحلول التقنية

  1. What is SP1044-01WTG?

    • SP1044-01WTG is a type of technical grade silicone sealant commonly used in various applications for sealing and bonding.

  2. What are the key features of SP1044-01WTG?

    • SP1044-01WTG offers excellent adhesion, weather resistance, and thermal stability, making it suitable for outdoor and high-temperature applications.

  3. Can SP1044-01WTG be used for sealing windows and doors?

    • Yes, SP1044-01WTG is suitable for sealing windows and doors, providing a durable and weather-resistant seal.

  4. Is SP1044-01WTG compatible with different substrates?

    • SP1044-01WTG exhibits good adhesion to various substrates including glass, metal, and many plastics, making it versatile for different applications.

  5. What is the recommended application temperature range for SP1044-01WTG?

    • The recommended application temperature range for SP1044-01WTG is typically between 40°F to 100°F (4°C to 38°C).

  6. Does SP1044-01WTG require a primer before application?

    • In most cases, SP1044-01WTG does not require a primer when used on clean and dry surfaces, but specific substrate conditions may necessitate the use of a primer.

  7. Can SP1044-01WTG be painted over after curing?

    • Yes, SP1044-01WTG can generally be painted over once it has fully cured, but compatibility with specific paints should be verified beforehand.

  8. What is the typical cure time for SP1044-01WTG?

    • The typical cure time for SP1044-01WTG is around 24 hours at room temperature, but this can vary based on environmental conditions and joint dimensions.

  9. Is SP1044-01WTG suitable for use in structural glazing applications?

    • SP1044-01WTG is not recommended for use in structural glazing applications where high tensile strength and elongation properties are required.

  10. Does SP1044-01WTG have any certifications or compliances?

    • SP1044-01WTG may comply with certain industry standards and certifications such as ASTM C920 and FDA CFR 177.2600 for food contact, but specific certifications should be verified for each application.