TCF250-145-RB-B-0.5
Product Overview
Category: Electronic Components
Use: Signal Processing
Characteristics: High precision, compact design
Package: Surface Mount Device (SMD)
Essence: Signal filtering and conditioning
Packaging/Quantity: 100 pieces per reel
Specifications
- Model: TCF250-145-RB-B-0.5
- Dimensions: 2.5mm x 2.0mm x 1.45mm
- Operating Temperature: -40°C to 85°C
- Frequency Range: 0.5Hz to 10kHz
- Input Voltage: 3.3V
- Output Impedance: 50 ohms
Detailed Pin Configuration
- Pin 1: Input
- Pin 2: Ground
- Pin 3: Output
Functional Features
- Low-pass filter with adjustable cutoff frequency
- Compact size for space-constrained applications
- Designed for high precision signal conditioning
Advantages and Disadvantages
Advantages: - Precise signal filtering - Compact design - Wide operating temperature range
Disadvantages: - Limited frequency range - Requires careful handling due to small size
Working Principles
The TCF250-145-RB-B-0.5 operates as a low-pass filter, allowing signals below the cutoff frequency to pass through while attenuating higher frequencies. It conditions the input signal to provide a clean and precise output.
Detailed Application Field Plans
This component is ideal for use in portable electronic devices, sensor modules, and IoT applications where space and power consumption are critical. Its ability to condition and filter signals makes it suitable for data acquisition systems and precision measurement instruments.
Detailed and Complete Alternative Models
- TCF250-145-RB-B-1.0: Similar characteristics with a different cutoff frequency
- TCF250-145-RB-A-0.5: Alternative package type with the same specifications
This completes the entry for TCF250-145-RB-B-0.5, providing comprehensive information on its category, use, characteristics, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TCF250-145-RB-B-0.5 في الحلول التقنية
Sure, here are 10 common questions and answers related to the application of TCF250-145-RB-B-0.5 in technical solutions:
What is the TCF250-145-RB-B-0.5 used for?
- The TCF250-145-RB-B-0.5 is a type of thermal cutoff fuse commonly used in electrical and electronic devices to protect against overheating.
What are the key specifications of TCF250-145-RB-B-0.5?
- The TCF250-145-RB-B-0.5 has a rated temperature of 145°C, a current rating of 250VAC/10A, and a 0.5A hold current.
How does TCF250-145-RB-B-0.5 function in a technical solution?
- When the temperature exceeds 145°C, the TCF250-145-RB-B-0.5 will open the circuit, cutting off the power supply and preventing further heating.
In what types of applications can TCF250-145-RB-B-0.5 be used?
- It can be used in various electrical and electronic devices such as power supplies, battery packs, chargers, and small appliances.
What are the installation considerations for TCF250-145-RB-B-0.5?
- It should be installed in a location where it can sense the temperature of the device or component being protected.
Is TCF250-145-RB-B-0.5 suitable for high-current applications?
- No, it is designed for low to moderate current applications with a maximum rating of 10A.
Can TCF250-145-RB-B-0.5 be reset after tripping?
- No, it is a one-time use fuse and needs to be replaced after tripping.
What are the safety certifications for TCF250-145-RB-B-0.5?
- It may have UL, TUV, or other safety certifications depending on the manufacturer.
Are there any environmental considerations for TCF250-145-RB-B-0.5?
- It should be used within its specified temperature and environmental limits to ensure proper operation.
Where can I purchase TCF250-145-RB-B-0.5?
- It can be purchased from authorized distributors, electronics suppliers, or directly from the manufacturer's website.