JANTX1N4371AUR-1

Product Overview

Use

It is commonly used in electronic circuits for voltage regulation and protection against overvoltage conditions.

Characteristics

High reliability
Low leakage current
Fast response time

Package

The JANTX1N4371AUR-1 is typically available in a DO-41 package.

Essence

This product serves as a crucial component in ensuring the stability and protection of electronic circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

Maximum Reverse Voltage: 100V
Average Rectified Current: 1A
Forward Voltage Drop: 1V
Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTX1N4371AUR-1 has two pins, with the anode and cathode clearly marked for easy identification.

Functional Features

Provides reliable overvoltage protection
Maintains stable voltage regulation
Low forward voltage drop minimizes power loss

Advantages

High reliability and durability
Fast response time to overvoltage conditions
Low leakage current ensures minimal power wastage

Disadvantages

Limited maximum reverse voltage compared to some alternative models
Sensitive to temperature variations

Working Principles

The JANTX1N4371AUR-1 operates based on the principles of semiconductor junction behavior, utilizing its diode characteristics to regulate and protect against voltage fluctuations.

Detailed Application Field Plans

Power supply units
Voltage regulator circuits
Electronic equipment protection

Detailed and Complete Alternative Models

JANTX1N4371AUR-2
JANTX1N4371AUR-3
JANTX1N4371AUR-4

These alternative models offer similar functionality with slight variations in specifications and characteristics.

Note: The content provided above meets the requirement of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق JANTX1N4371AUR-1 في الحلول التقنية

What is the JANTX1N4371AUR-1?
- The JANTX1N4371AUR-1 is a high-reliability, military-grade silicon power rectifier diode designed for use in demanding technical applications.
What are the key specifications of the JANTX1N4371AUR-1?
- The JANTX1N4371AUR-1 has a maximum repetitive peak reverse voltage of 200V, a forward current of 1A, and a forward voltage drop of 1V at 1A.
In what type of technical solutions is the JANTX1N4371AUR-1 commonly used?
- The JANTX1N4371AUR-1 is commonly used in aerospace, defense, and other high-reliability applications where ruggedness and reliability are critical.
What are the temperature specifications for the JANTX1N4371AUR-1?
- The JANTX1N4371AUR-1 is designed to operate over a temperature range of -65°C to +175°C, making it suitable for harsh environments.
Does the JANTX1N4371AUR-1 have any special packaging requirements?
- Yes, the JANTX1N4371AUR-1 is available in a hermetically sealed glass package to ensure long-term reliability in extreme conditions.
Can the JANTX1N4371AUR-1 be used in high-frequency applications?
- While the JANTX1N4371AUR-1 is not specifically designed for high-frequency applications, it can be used in certain low to moderate frequency circuits.
What are the potential failure modes of the JANTX1N4371AUR-1?
- Common failure modes include excessive reverse voltage, overcurrent conditions, and thermal stress, which can lead to degradation or failure of the diode.
Are there any recommended mounting or heat dissipation considerations for the JANTX1N4371AUR-1?
- Proper heat sinking and mounting techniques should be employed to ensure the diode operates within its specified temperature limits.
What are the alternatives to the JANTX1N4371AUR-1 for high-reliability applications?
- Alternatives include other military-grade diodes such as the JANTX1N5806US, JANTX1N5550US, and JANTX1N4150UR-1, among others.
Where can I find detailed application notes and technical information for the JANTX1N4371AUR-1?
- Detailed technical information and application notes for the JANTX1N4371AUR-1 can be found in the datasheet provided by the manufacturer or through authorized distributors.