DS1086LU-533+W

Product Overview

Category

DS1086LU-533+W belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for clock generation and frequency synthesis.

Characteristics

• Package: DS1086LU-533+W comes in a small outline package (SOP) format.
• Essence: It is a programmable oscillator with a wide frequency range.
• Packaging/Quantity: The product is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

The specifications for DS1086LU-533+W are as follows:

• Frequency Range: 1Hz to 133MHz
• Supply Voltage: 2.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Output Type: CMOS
• Programmable Features: Frequency selection, spread spectrum modulation, and output enable/disable control

Detailed Pin Configuration

The pin configuration for DS1086LU-533+W is as follows:

1. VDD - Power supply voltage input
2. GND - Ground reference
3. XIN - Crystal oscillator or external clock input
4. XOUT - Crystal oscillator output
5. SEL0 - Frequency selection input bit 0
6. SEL1 - Frequency selection input bit 1
7. SDO - Serial data output
8. SDI - Serial data input
9. CS - Chip select input
10. OE - Output enable input
11. SS - Spread spectrum modulation input
12. CLK - Clock output

Functional Features

DS1086LU-533+W offers the following functional features:

• Wide frequency range selection through frequency selection inputs (SEL0 and SEL1)
• Spread spectrum modulation capability for reduced electromagnetic interference (EMI)
• Output enable/disable control for power management
• Serial data interface for programming and control

Advantages and Disadvantages

Advantages: - Wide frequency range allows for versatile applications - Spread spectrum modulation reduces EMI emissions - Programmable features provide flexibility in system design

Disadvantages: - Limited to CMOS output type - Requires external crystal oscillator or clock input

Working Principles

DS1086LU-533+W operates by utilizing an internal phase-locked loop (PLL) to generate the desired output frequency. The PLL compares the input clock signal with a reference frequency and adjusts the output frequency accordingly. The programmable features allow for customization of the output frequency, spread spectrum modulation, and output enable/disable control.

Detailed Application Field Plans

DS1086LU-533+W finds applications in various electronic devices that require precise clock generation and frequency synthesis. Some potential application fields include:

1. Communication Systems: Used for clock synchronization in wireless communication systems.
2. Consumer Electronics: Provides accurate timing for audio/video equipment, gaming consoles, and digital cameras.
3. Industrial Automation: Enables precise timing in industrial control systems and robotics.
4. Automotive Electronics: Used for clock generation in automotive infotainment systems and engine control units.
5. Medical Devices: Provides accurate timing for medical equipment such as patient monitors and diagnostic devices.

Detailed and Complete Alternative Models

1. DS1086LU-333+W: Similar to DS1086LU-533+W but with a lower frequency range of 1Hz to 33MHz.
2. DS1086LU-800+W: Offers a higher frequency range of 1Hz to 800MHz for applications requiring faster clock speeds.
3. DS1086LU-SPREAD+W: Specifically designed for spread spectrum modulation applications, providing enhanced EMI reduction capabilities.

(Note: The alternative models mentioned above are hypothetical and may not reflect actual product availability.)

This concludes the encyclopedia entry for DS1086LU-533+W, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.