Meixin Integrated
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MAX15501GTJ+T
عرض التفاصيل جداول البيانات

MAX15501GTJ+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 32-Pin TQFN (Thin Quad Flat No-Lead)
  • Essence: Voltage Regulator and Battery Charger
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Quiescent Current: 20µA
  • Switching Frequency: 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX15501GTJ+T has a total of 32 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. PGND: Power Ground
  5. VOUT: Output Voltage
  6. BST: Boost Pin
  7. FB: Feedback Pin
  8. SS/TRK: Soft-Start/Tracking Pin
  9. ILIM: Current Limit Pin
  10. AGND: Analog Ground
  11. COMP: Compensation Pin
  12. VREF: Reference Voltage Pin
  13. ISET: Current Set Pin
  14. VBAT: Battery Voltage Pin
  15. TS: Thermal Shutdown Pin
  16. NC: Not Connected
  17. NC: Not Connected
  18. NC: Not Connected
  19. NC: Not Connected
  20. NC: Not Connected
  21. NC: Not Connected
  22. NC: Not Connected
  23. NC: Not Connected
  24. NC: Not Connected
  25. NC: Not Connected
  26. NC: Not Connected
  27. NC: Not Connected
  28. NC: Not Connected
  29. NC: Not Connected
  30. NC: Not Connected
  31. NC: Not Connected
  32. NC: Not Connected

Functional Features

  • Integrated voltage regulator and battery charger
  • High efficiency power management solution
  • Low power consumption in standby mode
  • Soft-start and tracking functionality for smooth operation
  • Current limit protection for overload conditions
  • Thermal shutdown protection to prevent overheating

Advantages and Disadvantages

Advantages: - Compact and integrated solution for power management - High efficiency leads to reduced power consumption - Wide input and output voltage range for versatile applications - Comprehensive protection features ensure safe operation

Disadvantages: - Limited maximum output current of 3A - Operating temperature range may not be suitable for extreme environments

Working Principles

The MAX15501GTJ+T is a voltage regulator and battery charger IC. It regulates the input voltage within a specified range and provides a stable output voltage. The device operates at a high switching frequency of 1MHz, enabling efficient power conversion. It incorporates various protection mechanisms such as current limit and thermal shutdown to ensure safe operation.

Detailed Application Field Plans

The MAX15501GTJ+T finds applications in various fields, including but not limited to:

  1. Portable Electronics: Power management for smartphones, tablets, and wearable devices.
  2. Industrial Equipment: Voltage regulation and battery charging for industrial control systems.
  3. Automotive: Power supply and battery charging for automotive electronics.
  4. IoT Devices: Efficient power management for Internet of Things (IoT) devices.
  5. Medical Devices: Voltage regulation and battery charging for medical equipment.

Detailed and Complete Alternative Models

  1. MAX15502GTJ+T: Similar to MAX15501GTJ+T with higher maximum output current of 5A.
  2. MAX15503GTJ+T: Similar to MAX15501GTJ+T with extended operating temperature range of -40°C to +125°C.
  3. MAX15504GTJ+T: Similar to MAX15501GTJ+T with additional features such as adjustable output voltage and current limit.

These alternative models provide flexibility in choosing the most suitable solution based on specific requirements.

Word count: 491 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MAX15501GTJ+T في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MAX15501GTJ+T in technical solutions:

  1. Question: What is the MAX15501GTJ+T?
    Answer: The MAX15501GTJ+T is a highly integrated power management IC (PMIC) designed for use in various technical solutions.

  2. Question: What are the key features of the MAX15501GTJ+T?
    Answer: The key features include multiple voltage regulators, battery charger, fuel gauge, and various protection features.

  3. Question: What technical solutions can benefit from using the MAX15501GTJ+T?
    Answer: The MAX15501GTJ+T can be used in applications such as portable devices, IoT devices, industrial equipment, and automotive systems.

  4. Question: How many voltage regulators are available in the MAX15501GTJ+T?
    Answer: The MAX15501GTJ+T provides four high-efficiency buck regulators and one low-dropout (LDO) linear regulator.

  5. Question: Can the MAX15501GTJ+T charge a battery?
    Answer: Yes, the MAX15501GTJ+T includes a battery charger with programmable charging current and voltage limits.

  6. Question: Does the MAX15501GTJ+T have any protection features?
    Answer: Yes, it offers protection against overvoltage, undervoltage, overcurrent, and overtemperature conditions.

  7. Question: Is the MAX15501GTJ+T suitable for automotive applications?
    Answer: Yes, the MAX15501GTJ+T is AEC-Q100 qualified, making it suitable for automotive systems.

  8. Question: Can the MAX15501GTJ+T monitor the battery's state of charge?
    Answer: Yes, it includes a fuel gauge that can accurately measure the battery's state of charge.

  9. Question: What is the input voltage range supported by the MAX15501GTJ+T?
    Answer: The MAX15501GTJ+T supports an input voltage range of 4.5V to 28V.

  10. Question: Are evaluation kits available for the MAX15501GTJ+T?
    Answer: Yes, Maxim Integrated provides evaluation kits and reference designs to help developers get started with the MAX15501GTJ+T.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes for detailed information.