MAX4397SCTM+T

Overview

• Category: Integrated Circuit
• Use: Amplifier
• Characteristics: High precision, low noise, wide bandwidth
• Package: SCT-6
• Essence: Operational Amplifier
• Packaging/Quantity: Tape & Reel (3000 pieces per reel)

Specifications and Parameters

• Supply Voltage Range: ±2.5V to ±18V
• Input Offset Voltage: 1.5mV (max)
• Input Bias Current: 1nA (typ)
• Gain Bandwidth Product: 100MHz (typ)
• Slew Rate: 50V/µs (typ)
• Output Current: ±40mA (min)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX4397SCTM+T has a total of 6 pins arranged as follows:

```

---

| | --| V- OUT |-- Pin 1: Negative Power Supply (V-) --| IN- V+ |-- Pin 2: Non-Inverting Input (IN+) --| IN+ GND |-- Pin 3: Inverting Input (IN-) --| V+ NC |-- Pin 4: Positive Power Supply (V+) --| OUT NC |-- Pin 5: Output (OUT) --| GND NC |-- Pin 6: Ground (GND) |___________| ```

Functional Characteristics

The MAX4397SCTM+T is a high-performance operational amplifier with the following functional characteristics:

• Low input offset voltage for accurate amplification.
• Low input bias current for minimal loading on the input signal.
• Wide bandwidth for high-frequency applications.
• High slew rate for fast signal response.
• High output current capability for driving low impedance loads.

Advantages and Disadvantages

Advantages: - High precision amplification. - Low noise performance. - Wide operating voltage range. - Compact SCT-6 package for space-constrained applications.

Disadvantages: - Relatively high input offset voltage compared to some other amplifiers. - Limited output current compared to power amplifiers.

Applicable Range of Products

The MAX4397SCTM+T is suitable for a wide range of applications, including but not limited to: - Audio amplification - Sensor signal conditioning - Active filters - Data acquisition systems - Instrumentation amplifiers

Working Principles

The MAX4397SCTM+T operates based on the principles of operational amplifiers. It amplifies the difference between the voltages at its non-inverting and inverting inputs, producing an amplified output signal.

Detailed Application Field Plans

1. Audio Amplification: The MAX4397SCTM+T can be used to amplify audio signals in audio systems, such as speakers and headphones.
2. Sensor Signal Conditioning: It can be employed to condition weak sensor signals, enhancing their strength and quality for further processing.
3. Active Filters: The amplifier can be utilized in active filter circuits to shape the frequency response of signals.
4. Data Acquisition Systems: It can be integrated into data acquisition systems to amplify and process analog signals from various sensors.
5. Instrumentation Amplifiers: The MAX4397SCTM+T can be part of instrumentation amplifiers used in precise measurement applications.

Detailed Alternative Models

Some alternative models to the MAX4397SCTM+T include: - MAX44246 - AD8628 - LT1490

5 Common Technical Questions and Answers

1. Q: What is the maximum supply voltage for the MAX4397SCTM+T? A: The maximum supply voltage is ±18V.

2. Q: What is the typical gain bandwidth product of this amplifier? A: The typical gain bandwidth product is 100MHz.

3. Q: What is the operating temperature range for this device? A: The operating temperature range is -40°C to +125°C.

4. Q: Can this amplifier drive low impedance loads? A: Yes, it has a minimum output current capability of ±40mA.

5. Q: What is the package type for the MAX4397SCTM+T? A: It comes in an SCT-6 package.

This encyclopedia entry provides an overview of the MAX4397SCTM+T operational amplifier, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.