MAX4896ATP+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX4896ATP+ belongs to the category of integrated circuits (ICs).

Use

It is primarily used as a level translator and voltage level shifter.

Characteristics

• The MAX4896ATP+ is a high-speed, low-power, bidirectional level translator.
• It operates from a single 1.65V to 5.5V supply.
• This IC features two configurable power-supply pins, allowing it to interface between different voltage domains.
• It provides bidirectional voltage translation without the need for a direction control signal.
• The device supports data rates up to 100Mbps.

Package

The MAX4896ATP+ is available in a TQFN package.

Essence

The essence of MAX4896ATP+ lies in its ability to provide seamless voltage level translation between different voltage domains.

Packaging/Quantity

This IC is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• Data Rate: Up to 100Mbps
• Operating Temperature Range: -40°C to +85°C
• Package Type: TQFN

Detailed Pin Configuration

The MAX4896ATP+ has a total of 20 pins. The pin configuration is as follows:

1. VCCA
2. GND
3. A1
4. A2
5. A3
6. A4
7. A5
8. B1
9. B2
10. B3
11. B4
12. B5
13. OE
14. VCCB
15. GND
16. B6
17. B7
18. B8
19. B9
20. B10

Functional Features

• Bidirectional voltage level translation without the need for a direction control signal.
• Configurable power-supply pins for interfacing between different voltage domains.
• High-speed operation with data rates up to 100Mbps.
• Low-power consumption.

Advantages and Disadvantages

Advantages

• Seamless voltage level translation between different voltage domains.
• No need for a direction control signal.
• Supports high-speed data transmission.
• Low-power consumption.

Disadvantages

• Limited to a maximum data rate of 100Mbps.
• May not be suitable for applications requiring higher data rates.

Working Principles

The MAX4896ATP+ uses a combination of level shifting circuitry and configurable power-supply pins to achieve bidirectional voltage level translation. The device automatically detects the voltage levels on the input side and translates them to the corresponding voltage levels on the output side.

Detailed Application Field Plans

The MAX4896ATP+ finds applications in various fields, including but not limited to: 1. Communication systems 2. Industrial automation 3. Consumer electronics 4. Automotive electronics 5. Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MAX4896ATP+ include: 1. TXB0108PWR 2. SN74LVC4245APWR 3. PCA9306DCUR 4. FXMA2102UCX

These alternative models can be considered based on specific application requirements and availability.

Word count: 410 words