MAX6336US18D3+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Reference
• Characteristics: Low Dropout, Precision, Low Noise
• Package: SOT-23-3
• Essence: Provides a stable and accurate voltage reference for various electronic applications
• Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

• Output Voltage: 1.8V
• Input Voltage Range: 2.5V to 5.5V
• Dropout Voltage: 150mV at 10mA
• Initial Accuracy: ±0.5%
• Temperature Coefficient: ±50ppm/°C
• Quiescent Current: 60µA
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX6336US18D3+T has three pins arranged as follows:

```

---

| | --| |-- |____| | | ```

1. Pin 1: GND (Ground)
2. Pin 2: VOUT (Output Voltage)
3. Pin 3: VIN (Input Voltage)

Functional Features

• Low dropout voltage ensures efficient operation even with low input voltages.
• High precision and low initial accuracy provide a stable output voltage.
• Low noise output minimizes interference in sensitive electronic circuits.
• Wide input voltage range allows compatibility with various power sources.
• Low quiescent current reduces power consumption.

Advantages and Disadvantages

Advantages: - Stable and accurate voltage reference - Low dropout voltage - Precision output - Low noise - Wide input voltage range

Disadvantages: - Relatively high temperature coefficient - Limited output voltage options

Working Principles

The MAX6336US18D3+T is a voltage reference IC that generates a stable and accurate output voltage of 1.8V. It operates by comparing the input voltage (VIN) with an internal reference voltage and adjusting the output voltage (VOUT) accordingly. The low dropout voltage ensures efficient operation even when the input voltage is close to the desired output voltage.

Detailed Application Field Plans

The MAX6336US18D3+T is commonly used in various electronic applications where a stable and precise voltage reference is required. Some typical application fields include:

1. Power Management: Provides a reference voltage for power management ICs, ensuring accurate regulation of voltages in power supplies.
2. Analog-to-Digital Conversion: Used as a reference voltage for ADCs, ensuring accurate conversion of analog signals into digital data.
3. Sensor Interfaces: Provides a stable reference voltage for sensor interfaces, enabling accurate measurements and readings.
4. Communication Systems: Used in communication systems to maintain stable voltage levels for reliable signal processing.

Detailed and Complete Alternative Models

1. MAX6335US18D3+T: Similar to MAX6336US18D3+T but with an output voltage of 1.8V.
2. MAX6337US18D3+T: Similar to MAX6336US18D3+T but with an output voltage of 1.8V and lower initial accuracy.
3. MAX6338US18D3+T: Similar to MAX6336US18D3+T but with an output voltage of 1.8V and higher temperature coefficient.

These alternative models provide similar functionality with slight variations in specifications to cater to different application requirements.

(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)