MAX913EUA+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: High-Speed Differential Line Driver
• Characteristics: Low power consumption, high-speed operation, small package size
• Package: 8-pin µMAX® package
• Essence: Amplifies and drives differential signals on high-speed data lines
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Supply Voltage Range: +2.4V to +5.5V
• Operating Temperature Range: -40°C to +85°C
• Output Voltage Swing: ±3.7V (minimum) at VCC = +5V
• Output Current: ±100mA (maximum)
• Input Common-Mode Voltage Range: -0.1V to +4V
• Propagation Delay: 2ns (typical)

Pin Configuration

The MAX913EUA+T has the following pin configuration:

```

---

| | --| VCC OUT+|-- Pin 1 --| IN+ OUT-|-- Pin 2 --| IN- GND |-- Pin 3 |___________| ```

Functional Features

• High-speed operation up to 400Mbps
• Low power consumption of only 10mW
• Wide supply voltage range for flexibility in various applications
• Differential inputs and outputs for noise immunity
• Short-circuit protection for robustness

Advantages and Disadvantages

Advantages: - High-speed operation allows for fast data transmission - Low power consumption reduces energy usage - Small package size saves board space - Wide supply voltage range enables compatibility with different systems - Differential inputs and outputs provide noise immunity

Disadvantages: - Limited output current may not be suitable for certain applications requiring higher current drive - Restricted input common-mode voltage range may limit compatibility with certain signal levels

Working Principles

The MAX913EUA+T is designed to amplify and drive differential signals on high-speed data lines. It operates by receiving differential input signals (IN+ and IN-) and amplifying them to provide differential output signals (OUT+ and OUT-). The amplified signals can then be transmitted over long distances without significant degradation.

Detailed Application Field Plans

The MAX913EUA+T finds applications in various fields, including:

1. Telecommunications: Used in high-speed data transmission systems, such as fiber optic networks and Ethernet connections.
2. Automotive: Employed in automotive communication protocols like CAN (Controller Area Network) and FlexRay for reliable and fast data transfer.
3. Industrial Automation: Utilized in industrial control systems that require high-speed and noise-immune communication between devices.
4. Medical Equipment: Integrated into medical devices for transmitting critical data between sensors and processing units.
5. Consumer Electronics: Incorporated in devices like smartphones, tablets, and gaming consoles to enable high-speed data transfer between components.

Detailed and Complete Alternative Models

1. MAX912EUA+T: Similar to MAX913EUA+T but with a lower operating temperature range (-40°C to +85°C).
2. MAX914EUA+T: Provides higher output voltage swing (±4.4V minimum) at the expense of slightly increased power consumption.
3. MAX911EUA+T: Offers a wider input common-mode voltage range (-0.5V to +4.5V) for enhanced compatibility with different signal levels.

(Note: These alternative models are from the same MAX91x series and share similar characteristics and pin configurations.)

Word count: 457 words