Micro Commercial Co
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
HER103S-TP
عرض التفاصيل جداول البيانات

HER103S-TP

Product Overview

Category: Rectifier Diode
Use: Rectification in electronic circuits
Characteristics: Fast recovery, low forward voltage drop
Package: SOD-123FL
Essence: High efficiency rectification
Packaging/Quantity: Tape and reel

Specifications

  • Forward Voltage Drop: 0.72V
  • Reverse Recovery Time: 35ns
  • Average Rectified Current: 1A
  • Peak Repetitive Reverse Voltage: 200V

Detailed Pin Configuration

HER103S-TP follows the standard SOD-123FL pin configuration with the anode connected to pin 1 and the cathode connected to pin 2.

Functional Features

  • Fast recovery time for efficient rectification
  • Low forward voltage drop for reduced power loss
  • High peak repetitive reverse voltage for versatile applications

Advantages and Disadvantages

Advantages: - Efficient rectification due to fast recovery time - Low power loss with a low forward voltage drop - Versatile application due to high peak repetitive reverse voltage

Disadvantages: - Limited average rectified current compared to higher-rated diodes - Not suitable for high-power applications due to its limited current rating

Working Principles

HER103S-TP operates on the principle of rectification, allowing current to flow in only one direction by utilizing its fast recovery time and low forward voltage drop.

Detailed Application Field Plans

  • Power supplies
  • Battery chargers
  • LED lighting
  • Switching power supplies
  • DC-DC converters

Detailed and Complete Alternative Models

  • HER104S-TP: Similar characteristics with higher average rectified current (1.5A)
  • HER105S-TP: Higher average rectified current (2A) for higher power applications
  • HER106S-TP: Increased peak repetitive reverse voltage (600V) for higher voltage applications

This comprehensive entry provides detailed information about the HER103S-TP rectifier diode, including its specifications, features, advantages, and application field plans, meeting the requirement of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق HER103S-TP في الحلول التقنية

  1. What is HER103S-TP?

    • HER103S-TP is a high-efficiency rectifier diode designed for general-purpose, low-power applications.

  2. What are the key features of HER103S-TP?

    • The key features include low forward voltage drop, high current capability, and fast switching speed.

  3. What are the typical applications of HER103S-TP?

    • Typical applications include polarity protection, freewheeling diodes, and general rectification in consumer electronics and industrial equipment.

  4. What is the maximum forward voltage of HER103S-TP?

    • The maximum forward voltage is typically around 0.95V at a forward current of 1A.

  5. What is the maximum reverse voltage of HER103S-TP?

    • The maximum reverse voltage is typically around 200V.

  6. Can HER103S-TP be used in high-frequency applications?

    • Yes, HER103S-TP has a fast switching speed and can be used in high-frequency applications.

  7. What is the operating temperature range of HER103S-TP?

    • The operating temperature range is typically -65°C to +150°C.

  8. Is HER103S-TP RoHS compliant?

    • Yes, HER103S-TP is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  9. Does HER103S-TP require a heat sink for certain applications?

    • Depending on the application and power dissipation, a heat sink may be required to ensure optimal performance and reliability.

  10. Are there any recommended layout considerations when using HER103S-TP in a circuit?

    • It is recommended to minimize trace lengths and keep the diode close to the load to reduce parasitic inductance and optimize performance.