The 24LC08BHT-I/OT belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The 24LC08BHT-I/OT is available in a small surface-mount package (SOT-23-5), which allows for easy integration into compact electronic designs.
The essence of the 24LC08BHT-I/OT lies in its ability to provide reliable and non-volatile data storage in a compact form factor.
This chip is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer.
The 24LC08BHT-I/OT has a total of 5 pins arranged as follows:
The 24LC08BHT-I/OT utilizes electrically controlled floating gate transistors to store data. When programming, an electrical charge is applied to the floating gate, altering its threshold voltage and storing the desired data. Erasing is achieved by removing the charge from the floating gate using an electrical pulse. The stored data can be accessed by sending appropriate commands through the I2C interface.
The 24LC08BHT-I/OT finds applications in various fields, including: - Microcontroller-based systems - Industrial automation - Automotive electronics - Consumer electronics - Medical devices - Communication equipment
Some alternative models to the 24LC08BHT-I/OT include: - 24LC16BHT-I/OT: 16 kilobits (2 kilobytes) storage capacity. - 24LC32BHT-I/OT: 32 kilobits (4 kilobytes) storage capacity. - 24LC64BHT-I/OT: 64 kilobits (8 kilobytes) storage capacity. - 24LC128BHT-I/OT: 128 kilobits (16 kilobytes) storage capacity.
These alternative models offer increased storage capacity but may have different pin configurations or package sizes.
In conclusion, the 24LC08BHT-I/OT is a compact EEPROM chip with a storage capacity of 8 kilobits. It provides non-volatile data storage, low power consumption, and a
Question: What is the maximum clock frequency for 24LC08BHT-I/OT?
Answer: The maximum clock frequency for 24LC08BHT-I/OT is 400 kHz.
Question: What is the operating voltage range for 24LC08BHT-I/OT?
Answer: The operating voltage range for 24LC08BHT-I/OT is 1.7V to 5.5V.
Question: Can 24LC08BHT-I/OT be used in automotive applications?
Answer: Yes, 24LC08BHT-I/OT is suitable for automotive applications.
Question: What is the typical write cycle time for 24LC08BHT-I/OT?
Answer: The typical write cycle time for 24LC08BHT-I/OT is 5 ms.
Question: Does 24LC08BHT-I/OT support sequential reads?
Answer: Yes, 24LC08BHT-I/OT supports sequential reads.
Question: What is the maximum write cycle endurance for 24LC08BHT-I/OT?
Answer: The maximum write cycle endurance for 24LC08BHT-I/OT is 1 million cycles.
Question: Is 24LC08BHT-I/OT compatible with I2C protocol?
Answer: Yes, 24LC08BHT-I/OT is compatible with I2C protocol.
Question: Can 24LC08BHT-I/OT operate at extended temperature ranges?
Answer: Yes, 24LC08BHT-I/OT can operate at extended temperature ranges from -40°C to 125°C.
Question: What is the package type for 24LC08BHT-I/OT?
Answer: 24LC08BHT-I/OT is available in a 2x3 mm DFN package.
Question: Does 24LC08BHT-I/OT have built-in write protection?
Answer: Yes, 24LC08BHT-I/OT features built-in hardware write protection.