MD1711K6-G-M933

Product Overview

• Category: Electronic Component
• Use: Integrated Circuit
• Characteristics: High-performance, low-power consumption
• Package: Surface Mount Technology (SMT)
• Essence: Microcontroller
• Packaging/Quantity: Tape and Reel, 1000 units per reel

Specifications

• Model: MD1711K6-G-M933
• Operating Voltage: 3.3V
• Clock Frequency: 16 MHz
• Flash Memory: 128 KB
• RAM: 8 KB
• I/O Pins: 32
• Communication Interfaces: UART, SPI, I2C
• Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The MD1711K6-G-M933 microcontroller has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | RESET | Reset Input | | 4 | XTAL1 | Crystal Oscillator Input | | 5 | XTAL2 | Crystal Oscillator Output | | 6-37 | GPIO0-31 | General Purpose I/O Pins | | 38 | RXD | UART Receive Data | | 39 | TXD | UART Transmit Data | | 40 | SDA | I2C Serial Data | | 41 | SCL | I2C Serial Clock | | 42 | CS | SPI Chip Select | | 43 | MOSI | SPI Master Out Slave In | | 44 | MISO | SPI Master In Slave Out | | 45 | SCK | SPI Serial Clock |

Functional Features

• High-performance microcontroller suitable for various applications
• Low-power consumption for energy-efficient designs
• Integrated flash memory for program storage
• Ample RAM for data processing
• Multiple communication interfaces for versatile connectivity
• GPIO pins for flexible input/output configurations
• Reset functionality for system initialization and recovery

Advantages and Disadvantages

Advantages

• High performance allows for efficient execution of complex tasks
• Low power consumption extends battery life in portable devices
• Ample memory enables storage of large programs and data
• Versatile communication interfaces facilitate integration with other devices
• Flexible GPIO configuration provides customization options

Disadvantages

• Limited number of I/O pins may restrict the number of connected peripherals
• Higher cost compared to simpler microcontrollers with fewer features
• Steeper learning curve due to the complexity of the device

Working Principles

The MD1711K6-G-M933 microcontroller operates based on the principles of digital logic and microprocessor architecture. It executes instructions stored in its flash memory, processes data using its internal resources, and communicates with external devices through its various interfaces. The clock frequency determines the speed at which instructions are executed, while the operating voltage powers the device.

Detailed Application Field Plans

The MD1711K6-G-M933 microcontroller finds applications in various fields, including:

1. Industrial Automation: Control systems, motor drives, and monitoring devices.
2. Internet of Things (IoT): Smart home automation, sensor networks, and wearable devices.
3. Consumer Electronics: Remote controls, gaming consoles, and audio/video equipment.
4. Automotive: Engine control units, dashboard displays, and vehicle diagnostics.
5. Medical Devices: Patient monitoring systems, medical imaging, and diagnostic equipment.

Detailed and Complete Alternative Models

1. MD1711K6-G-M944: Similar to MD1711K6-G-M933 but with increased flash memory capacity (256 KB).
2. MD1711K6-G-M922: Similar to MD1711K6-G-M933 but with reduced RAM capacity (4 KB).
3. MD1711K6-G-M955: Similar to MD1711K6-G-M933 but with additional communication interfaces (CAN, Ethernet).

These alternative models provide options for different memory requirements and additional features based on specific application needs.

Word count: 446 words