قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MIC184BM

MIC184BM

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy
Package: SOIC-8
Essence: Regulates voltage with low dropout and high accuracy
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Dropout Voltage: 150mV at 300mA
  • Accuracy: ±1%
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. NC (No Connection)
  5. VOUT (Output Voltage)
  6. NC (No Connection)
  7. NC (No Connection)
  8. EN (Enable)

Functional Features

  • Low dropout voltage
  • High accuracy over line and load variations
  • Thermal shutdown and current limit protection
  • Stable with ceramic output capacitors

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • High accuracy
  • Small package size

Disadvantages

  • Limited output current capability
  • Higher quiescent current compared to some alternatives

Working Principles

The MIC184BM is a low dropout voltage regulator that uses a PNP pass transistor to achieve a low dropout voltage. It regulates the output voltage by comparing it to an internal reference and adjusting the pass transistor accordingly.

Detailed Application Field Plans

The MIC184BM is suitable for various battery-powered applications where a stable and accurate voltage supply is required. It can be used in portable devices, IoT devices, and other low-power applications.

Detailed and Complete Alternative Models

  • MIC39100: Higher output current capability
  • MIC5205: Lower quiescent current
  • LT1763: Lower dropout voltage

Note: The alternative models listed above are for reference purposes and may have different specifications and pin configurations.


This entry provides a comprehensive overview of the MIC184BM, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MIC184BM في الحلول التقنية

  1. What is MIC184BM?

    • MIC184BM is a low-dropout voltage regulator with a high output current capability, designed for use in various technical solutions.
  2. What is the input voltage range for MIC184BM?

    • The input voltage range for MIC184BM is typically 2.7V to 5.5V.
  3. What is the maximum output current of MIC184BM?

    • The maximum output current of MIC184BM is typically 150mA.
  4. What are the typical applications of MIC184BM?

    • Typical applications of MIC184BM include portable and battery-powered devices, industrial sensors, and other low-power systems.
  5. Does MIC184BM have built-in thermal shutdown protection?

    • Yes, MIC184BM features built-in thermal shutdown protection to prevent damage from excessive heat.
  6. What is the dropout voltage of MIC184BM?

    • The dropout voltage of MIC184BM is typically 200mV at 100mA load.
  7. Is MIC184BM suitable for automotive applications?

    • Yes, MIC184BM is suitable for automotive applications due to its wide input voltage range and robust design.
  8. Can MIC184BM be used in conjunction with a microcontroller?

    • Yes, MIC184BM can be easily integrated with a microcontroller to provide regulated power for various components.
  9. What is the operating temperature range of MIC184BM?

    • The operating temperature range of MIC184BM is typically -40°C to 125°C.
  10. Does MIC184BM require external capacitors for stability?

    • Yes, MIC184BM requires external capacitors for stability and proper operation, as specified in the datasheet.