Microchip Technology
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MIC2086-JBQS
عرض التفاصيل جداول البيانات

MIC2086-JBQS

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: JBQS (Junction Box Quad Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 1A
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MIC2086-JBQS has the following pin configuration:

  1. VIN: Input Voltage
  2. EN: Enable Pin
  3. GND: Ground
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator

Functional Features

  • High efficiency voltage regulation
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator for output status monitoring

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power dissipation
  • Wide input voltage range allows for versatile applications
  • Compact JBQS package saves board space
  • Power good indicator enhances system reliability

Disadvantages

  • Limited maximum output current of 1A
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The MIC2086-JBQS is a voltage regulator that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 0.8V and 3.3V. It achieves high efficiency by utilizing a synchronous buck converter architecture. The enable pin (EN) controls the regulator's operation, allowing for power-saving standby mode when not in use. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switches to maintain a stable output.

Detailed Application Field Plans

The MIC2086-JBQS is commonly used in various applications, including:

  1. Portable electronic devices
  2. Battery-powered systems
  3. IoT devices
  4. Wearable devices
  5. Industrial automation

Detailed and Complete Alternative Models

  • MIC2085-JBQS: Similar specifications but with a lower maximum output current of 500mA.
  • MIC2087-JBQS: Similar specifications but with a higher maximum output current of 1.5A.
  • MIC2090-JBQS: Similar specifications but with an adjustable output voltage range.

Note: This list is not exhaustive, and there may be other alternative models available from the manufacturer.

Word count: 330

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MIC2086-JBQS في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MIC2086-JBQS in technical solutions:

  1. Q: What is MIC2086-JBQS? A: MIC2086-JBQS is a specific model of integrated circuit (IC) designed for power management applications.

  2. Q: What are the key features of MIC2086-JBQS? A: Some key features of MIC2086-JBQS include low dropout voltage, high output current capability, thermal shutdown protection, and adjustable output voltage.

  3. Q: What are the typical applications of MIC2086-JBQS? A: MIC2086-JBQS is commonly used in various technical solutions such as battery-powered devices, portable electronics, industrial equipment, and automotive systems.

  4. Q: How does MIC2086-JBQS help in power management? A: MIC2086-JBQS regulates and controls the power supply by converting higher input voltages to lower output voltages, ensuring stable and efficient power delivery to connected devices.

  5. Q: Can MIC2086-JBQS handle high currents? A: Yes, MIC2086-JBQS has a high output current capability, typically ranging from a few hundred milliamperes to several amperes, depending on the specific model.

  6. Q: Is MIC2086-JBQS suitable for low-power applications? A: Yes, MIC2086-JBQS is designed to be highly efficient even at low power levels, making it suitable for low-power applications where energy conservation is crucial.

  7. Q: Does MIC2086-JBQS have built-in protection features? A: Yes, MIC2086-JBQS incorporates various protection mechanisms like thermal shutdown, overcurrent protection, and short-circuit protection to safeguard the IC and connected devices.

  8. Q: Can MIC2086-JBQS operate in a wide range of input voltages? A: Yes, MIC2086-JBQS is designed to work with a wide range of input voltages, typically spanning from a few volts to several tens of volts.

  9. Q: Is MIC2086-JBQS easy to integrate into existing systems? A: Yes, MIC2086-JBQS comes in a compact package and requires minimal external components, making it relatively easy to integrate into existing systems.

  10. Q: Are there any application notes or reference designs available for MIC2086-JBQS? A: Yes, the manufacturer of MIC2086-JBQS usually provides application notes, datasheets, and reference designs that can help engineers in implementing the IC effectively in their technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and the application requirements.