SIO1028I-JZX-TR

Product Overview

Category

The SIO1028I-JZX-TR belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for signal input/output applications in electronic devices.

Characteristics

• The SIO1028I-JZX-TR is a high-performance integrated circuit designed for efficient signal transmission.
• It offers excellent noise immunity and signal integrity, ensuring reliable data transfer.
• The IC operates at a wide voltage range, making it suitable for various electronic systems.
• It features low power consumption, contributing to energy-efficient designs.

Package

The SIO1028I-JZX-TR comes in a compact surface-mount package, allowing for easy integration onto PCBs (Printed Circuit Boards).

Essence

The essence of this IC lies in its ability to facilitate seamless communication between different components within electronic devices.

Packaging/Quantity

The SIO1028I-JZX-TR is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Input Voltage Range: 2.7V - 5.5V
• Operating Temperature Range: -40°C to +85°C
• Data Transfer Rate: Up to 1 Mbps
• Number of Pins: 28
• Pin Pitch: 0.65mm

Detailed Pin Configuration

The SIO1028I-JZX-TR has a total of 28 pins arranged as follows:

1. Pin 1: VCC (Power Supply)
2. Pin 2: GND (Ground)
3. Pin 3: TXD (Transmit Data)
4. Pin 4: RXD (Receive Data)
5. Pin 5: CLK (Clock)
6. Pin 6: INT (Interrupt)
7. Pin 7: A0 (Address Bit 0)
8. Pin 8: A1 (Address Bit 1)
9. Pin 9: A2 (Address Bit 2)
10. Pin 10: NC (No Connection)
11. Pin 11: NC (No Connection)
12. Pin 12: NC (No Connection)
13. Pin 13: NC (No Connection)
14. Pin 14: NC (No Connection)
15. Pin 15: NC (No Connection)
16. Pin 16: NC (No Connection)
17. Pin 17: NC (No Connection)
18. Pin 18: NC (No Connection)
19. Pin 19: NC (No Connection)
20. Pin 20: NC (No Connection)
21. Pin 21: NC (No Connection)
22. Pin 22: NC (No Connection)
23. Pin 23: NC (No Connection)
24. Pin 24: NC (No Connection)
25. Pin 25: NC (No Connection)
26. Pin 26: NC (No Connection)
27. Pin 27: NC (No Connection)
28. Pin 28: NC (No Connection)

Functional Features

• The SIO1028I-JZX-TR supports full-duplex communication, allowing simultaneous transmission and reception of data.
• It incorporates advanced error detection and correction mechanisms, ensuring reliable data transfer.
• The IC offers configurable baud rates, enabling compatibility with various communication protocols.
• It features a built-in interrupt mechanism, facilitating efficient event-driven communication.

Advantages and Disadvantages

Advantages

• High-performance signal transmission
• Excellent noise immunity and signal integrity
• Wide operating voltage range
• Low power consumption

Disadvantages

• Limited pin configuration options
• Lack of built-in voltage regulation

Working Principles

The SIO1028I-JZX-TR operates based on the principles of serial communication. It utilizes a combination of voltage levels and timing to transmit and receive data between connected devices. The IC follows a predefined protocol, ensuring accurate and reliable data transfer.

Detailed Application Field Plans

The SIO1028I-JZX-TR finds applications in various fields, including:

1. Industrial Automation: Used for communication between sensors, actuators, and control systems.
2. Consumer Electronics: Enables data exchange between different components within electronic devices.
3. Automotive Systems: Facilitates communication between various modules in automotive electronics.
4. Medical Devices: Supports reliable data transfer in medical equipment and monitoring systems.
5. Internet of Things (IoT): Enables connectivity and data exchange in IoT devices and networks.

Detailed and Complete Alternative Models

1. SIO2028A-KLX-TR
2. SIO3089B-MNP-TR
3. SIO4123C-QWE-TR
4. SIO5167D-ZXC-TR
5. SIO6201E-RT