The M25P16S-VMN6TP TR belongs to the category of Serial Flash Memory.
This product is primarily used for storing and retrieving digital data in electronic devices such as microcontrollers, embedded systems, and consumer electronics.
The M25P16S-VMN6TP TR is available in a small form factor package, commonly known as an SOIC-8 (Small Outline Integrated Circuit). It is supplied in tape and reel packaging, with a quantity of 2500 units per reel.
The M25P16S-VMN6TP TR has eight pins arranged as follows:
┌───┬───┐
│1 8│
│2 7│
│3 6│
│4 5│
└───┴───┘
The M25P16S-VMN6TP TR utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is removed. The device can be accessed by sending commands through the SPI interface, allowing read, write, erase, and other operations.
The M25P16S-VMN6TP TR finds applications in various fields, including: 1. Microcontrollers: Used for program storage and firmware updates. 2. Embedded Systems: Provides non-volatile memory for data logging and configuration storage. 3. Consumer Electronics: Enables firmware updates and data storage in devices such as smart TVs, set-top boxes, and gaming consoles.
Below are some alternative models that offer similar functionality to the M25P16S-VMN6TP TR:
These alternatives provide comparable specifications and features, making them suitable replacements for the M25P16S-VMN6TP TR in various applications.
In conclusion, the M25
Sure! Here are 10 common questions and answers related to the application of M25P16S-VMN6TP TR in technical solutions:
Q: What is the M25P16S-VMN6TP TR? A: The M25P16S-VMN6TP TR is a serial flash memory chip manufactured by Micron. It has a capacity of 16 megabits (2 megabytes) and operates on a Serial Peripheral Interface (SPI).
Q: What are the typical applications of M25P16S-VMN6TP TR? A: The M25P16S-VMN6TP TR is commonly used in various electronic devices, such as routers, set-top boxes, automotive systems, and industrial equipment, where non-volatile storage is required.
Q: What is the operating voltage range of M25P16S-VMN6TP TR? A: The M25P16S-VMN6TP TR operates within a voltage range of 2.7V to 3.6V.
Q: What is the maximum clock frequency supported by M25P16S-VMN6TP TR? A: The M25P16S-VMN6TP TR supports a maximum clock frequency of 75 MHz.
Q: How fast is the data transfer rate of M25P16S-VMN6TP TR? A: The M25P16S-VMN6TP TR has a maximum data transfer rate of 9.375 megabytes per second (MB/s).
Q: Does M25P16S-VMN6TP TR support sector erase operation? A: Yes, the M25P16S-VMN6TP TR supports sector erase operation, allowing you to erase a specific sector of the flash memory.
Q: Can I perform a software write protection on M25P16S-VMN6TP TR? A: Yes, the M25P16S-VMN6TP TR provides software write protection by using specific commands to protect certain areas of the flash memory from being written.
Q: Is M25P16S-VMN6TP TR compatible with 3.3V and 5V logic levels? A: Yes, the M25P16S-VMN6TP TR is compatible with both 3.3V and 5V logic levels, making it suitable for a wide range of applications.
Q: Does M25P16S-VMN6TP TR have any security features? A: No, the M25P16S-VMN6TP TR does not have built-in security features like hardware encryption or authentication.
Q: What is the package type of M25P16S-VMN6TP TR? A: The M25P16S-VMN6TP TR comes in an 8-pin SOIC (Small Outline Integrated Circuit) package.
Please note that these answers are based on general information about the M25P16S-VMN6TP TR and may vary depending on specific implementations and requirements.