MT29F128G08AMAAAC5-IT:A

Product Overview

Category

MT29F128G08AMAAAC5-IT:A belongs to the category of NAND Flash Memory.

Use

This product is primarily used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

• High storage capacity: The MT29F128G08AMAAAC5-IT:A offers a storage capacity of 128 gigabytes (GB), allowing for ample data storage.
• Fast data transfer rate: With its advanced architecture, this NAND flash memory provides high-speed data transfer, enabling efficient read and write operations.
• Reliable performance: The product ensures reliable performance with its robust design and error correction capabilities.
• Low power consumption: The MT29F128G08AMAAAC5-IT:A is designed to consume minimal power, making it suitable for battery-powered devices.
• Compact package: This NAND flash memory comes in a compact package, allowing for easy integration into various electronic devices.

Packaging/Quantity

The MT29F128G08AMAAAC5-IT:A is typically packaged in a surface-mount technology (SMT) package. It is available in different quantities, ranging from individual units to bulk packaging, depending on customer requirements.

Specifications

• Manufacturer: Micron Technology Inc.
• Part Number: MT29F128G08AMAAAC5-IT:A
• Memory Type: NAND Flash
• Storage Capacity: 128 GB
• Interface: Serial Peripheral Interface (SPI)
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Package Type: TSOP (Thin Small Outline Package)
• Pin Count: 48 pins

Detailed Pin Configuration

1. VCC: Power supply voltage
2. VSS: Ground
3. CE# (Chip Enable): Enables the device for operation
4. CLE (Command Latch Enable): Latches command inputs
5. ALE (Address Latch Enable): Latches address inputs
6. RE# (Read Enable): Enables read operations
7. WE# (Write Enable): Enables write operations
8. R/B# (Ready/Busy): Indicates device status (ready/busy)
9. WP# (Write Protect): Write protection control
10. NC (No Connect): No connection

(Note: Detailed pin configuration continues for the remaining pins)

Functional Features

• Page Read and Program: The MT29F128G08AMAAAC5-IT:A allows reading and programming of data in page-level granularity, providing efficient data access.
• Block Erase: This NAND flash memory supports block erase operations, allowing for quick and easy erasure of data.
• Error Correction Code (ECC): The product incorporates ECC algorithms to detect and correct errors, ensuring data integrity.
• Wear-Leveling: With wear-leveling techniques, the MT29F128G08AMAAAC5-IT:A evenly distributes write operations across memory blocks, extending its lifespan.
• Bad Block Management: The device includes mechanisms to manage and mark bad blocks, preventing their use for data storage.

Advantages and Disadvantages

Advantages

• High storage capacity enables extensive data storage.
• Fast data transfer rate ensures efficient read and write operations.
• Reliable performance with error correction capabilities.
• Low power consumption ideal for battery-powered devices.
• Compact package facilitates integration into various electronic devices.

Disadvantages

• Limited endurance: Like all NAND flash memories, the MT29F128G08AMAAAC5-IT:A has a finite number of program/erase cycles before it may become unreliable.
• Relatively higher cost compared to other storage technologies such as hard disk drives (HDDs).

Working Principles

The MT29F128G08AMAAAC5-IT:A utilizes NAND flash memory technology, which stores data in a series of memory cells organized in a grid-like structure. Each cell can store multiple bits of information by varying the electrical charge on a floating gate. To read or write data, specific voltage levels are applied to the appropriate pins, enabling the transfer of electrons to or from the floating gates.

Detailed Application Field Plans

The MT29F128G08AMAAAC5-IT:A is widely used in various electronic devices that require high-capacity and reliable data storage. Some common application fields include:

1. Smartphones and tablets: The product provides ample storage for apps, media files, and user data.
2. Digital cameras: Enables storing high-resolution photos and videos.
3. Solid-state drives (SSDs): Used as primary storage in laptops and desktop computers, offering faster boot times and improved system performance.
4. Industrial control systems: Provides non-volatile storage for critical data in industrial automation and control applications. 5