Category: Memory Module
Use: Data storage and retrieval
Characteristics: High-speed, high-capacity, non-volatile
Package: Integrated circuit (IC)
Essence: Dynamic Random Access Memory (DRAM)
Packaging/Quantity: Single unit
The MT41K128M16HA-15E:D memory module has a total of 96 pins arranged in a specific configuration. The pinout diagram is as follows:
Pin 1: VSS
Pin 2: DQ0
Pin 3: DQ1
...
Pin 95: VDD
Pin 96: VSS
Please refer to the datasheet for a complete pin configuration diagram.
Advantages: - Fast data access and retrieval - Suitable for high-performance computing applications - Reliable and durable - Compatible with existing DDR3 memory systems
Disadvantages: - Higher power consumption compared to newer memory technologies - Limited capacity compared to newer memory technologies
The MT41K128M16HA-15E:D memory module operates based on the principles of dynamic random access memory (DRAM). It stores data in a matrix of capacitors, where each capacitor represents a single bit of information. The stored data needs to be periodically refreshed to maintain its integrity.
When the system requires access to specific data, the memory controller sends a command along with the address to the memory module. The module then retrieves the requested data and transfers it back to the controller for further processing.
The MT41K128M16HA-15E:D memory module finds applications in various fields, including:
Please note that the above list is not exhaustive, and there are several other alternative models available in the market.
Word count: 313 words
Sure! Here are 10 common questions and answers related to the application of MT41K128M16HA-15E:D in technical solutions:
Question: What is the capacity of the MT41K128M16HA-15E:D memory module?
Answer: The MT41K128M16HA-15E:D has a capacity of 2GB (Gigabytes).
Question: What is the speed rating of the MT41K128M16HA-15E:D memory module?
Answer: The MT41K128M16HA-15E:D has a speed rating of 1500MHz.
Question: What type of memory technology does the MT41K128M16HA-15E:D use?
Answer: The MT41K128M16HA-15E:D uses DDR3 SDRAM (Double Data Rate 3 Synchronous Dynamic Random Access Memory) technology.
Question: What is the voltage requirement for the MT41K128M16HA-15E:D memory module?
Answer: The MT41K128M16HA-15E:D operates at a voltage of 1.5V.
Question: Can the MT41K128M16HA-15E:D be used in both desktop and laptop computers?
Answer: Yes, the MT41K128M16HA-15E:D can be used in both desktop and laptop computers as long as they support DDR3 memory.
Question: Is the MT41K128M16HA-15E:D compatible with dual-channel memory configurations?
Answer: Yes, the MT41K128M16HA-15E:D can be used in dual-channel memory configurations for increased performance.
Question: What is the CAS latency of the MT41K128M16HA-15E:D memory module?
Answer: The CAS latency of the MT41K128M16HA-15E:D is 15.
Question: Can the MT41K128M16HA-15E:D be overclocked for higher performance?
Answer: Yes, the MT41K128M16HA-15E:D can be overclocked, but it is important to ensure that the system and motherboard support overclocking.
Question: Is the MT41K128M16HA-15E:D compatible with ECC (Error-Correcting Code) memory systems?
Answer: No, the MT41K128M16HA-15E:D does not support ECC memory systems.
Question: Can the MT41K128M16HA-15E:D be used in server applications?
Answer: Yes, the MT41K128M16HA-15E:D can be used in server applications that require DDR3 memory modules.
Please note that these answers are based on general information about the MT41K128M16HA-15E:D memory module. It is always recommended to refer to the manufacturer's specifications and guidelines for specific technical solutions.