قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MT48H8M16LFB4-6 IT:K

MT48H8M16LFB4-6 IT:K

Product Overview

Category: Integrated Circuit (IC)

Use: Memory module

Characteristics: - High-speed synchronous dynamic random-access memory (SDRAM) - Low power consumption - Large storage capacity - Fast data transfer rate - Reliable performance

Package: FBGA (Fine-Pitch Ball Grid Array)

Essence: The MT48H8M16LFB4-6 IT:K is a high-performance memory module designed for various electronic devices, including computers, servers, and networking equipment. It provides fast and reliable data storage and retrieval capabilities.

Packaging/Quantity: The MT48H8M16LFB4-6 IT:K is typically packaged in trays or reels, with each package containing a specific quantity of memory modules. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Type: SDRAM
  • Organization: 8M words x 16 bits
  • Data Rate: 166 MHz
  • Voltage Supply: 2.5V
  • Operating Temperature Range: -40°C to +85°C
  • Package Dimensions: 78-ball FBGA

Pin Configuration

The MT48H8M16LFB4-6 IT:K has a total of 78 pins. The pin configuration is as follows:

  1. VDD
  2. DQ0
  3. DQ1
  4. DQ2
  5. DQ3
  6. DQ4
  7. DQ5
  8. DQ6
  9. DQ7
  10. VSS
  11. DQ8
  12. DQ9
  13. DQ10
  14. DQ11
  15. DQ12
  16. DQ13
  17. DQ14
  18. DQ15
  19. VSS
  20. A0
  21. A1
  22. A2
  23. A3
  24. A4
  25. A5
  26. A6
  27. A7
  28. VSS
  29. A8
  30. A9
  31. A10
  32. A11
  33. A12
  34. A13
  35. A14
  36. A15
  37. VSS
  38. A16
  39. A17
  40. A18
  41. A19
  42. BA0
  43. BA1
  44. VSS
  45. RAS#
  46. CAS#
  47. WE#
  48. CS#
  49. VSS
  50. CLK
  51. CKE
  52. ODT
  53. VSS
  54. DM0
  55. DM1
  56. VSS
  57. DQS0#
  58. DQS0
  59. VSS
  60. DQS1#
  61. DQS1
  62. VSS
  63. DQS2#
  64. DQS2
  65. VSS
  66. DQS3#
  67. DQS3
  68. VSS
  69. DQSN0
  70. DQSN1
  71. VSS
  72. DQSN2
  73. DQSN3
  74. VSS
  75. VDD
  76. VDD
  77. VDD
  78. VDD

Functional Features

  • High-speed data transfer: The MT48H8M16LFB4-6 IT:K operates at a data rate of 166 MHz, allowing for fast and efficient data transfer between the memory module and the host device.
  • Low power consumption: This memory module is designed to minimize power consumption, making it suitable for battery-powered devices or energy-efficient systems.
  • Large storage capacity: With an organization of 8M words x 16 bits, the MT48H8M16LFB4-6 IT:K provides a substantial amount of storage space for storing data and instructions.
  • Reliable performance: The module is built with high-quality components and undergoes rigorous testing to ensure reliable and stable performance.

Advantages and Disadvantages

Advantages: - High-speed data transfer rate - Low power consumption - Large storage capacity - Reliable performance

Disadvantages: - Limited compatibility with certain older systems or devices - Higher cost compared to lower-capacity memory modules

Working Principles

The MT48H8M16LFB4-6 IT:K operates based on synchronous dynamic random-access memory (SDRAM) technology. It uses a clock signal to synchronize data transfers between the memory module and the host device. When the host device requires data from the memory module, it sends a command along with the address of the desired data. The memory module then retrieves the requested data and sends it back to the

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MT48H8M16LFB4-6 IT:K في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MT48H8M16LFB4-6 IT:K in technical solutions:

  1. Q: What is the MT48H8M16LFB4-6 IT:K? A: The MT48H8M16LFB4-6 IT:K is a specific model of DDR3 SDRAM memory module.

  2. Q: What is the capacity of the MT48H8M16LFB4-6 IT:K? A: The MT48H8M16LFB4-6 IT:K has a capacity of 128 Megabytes (MB).

  3. Q: What is the speed rating of the MT48H8M16LFB4-6 IT:K? A: The MT48H8M16LFB4-6 IT:K has a speed rating of 667 MHz.

  4. Q: What is the form factor of the MT48H8M16LFB4-6 IT:K? A: The MT48H8M16LFB4-6 IT:K follows the Small Outline Dual In-Line Memory Module (SO-DIMM) form factor.

  5. Q: What voltage does the MT48H8M16LFB4-6 IT:K operate at? A: The MT48H8M16LFB4-6 IT:K operates at a voltage of 1.5V.

  6. Q: Can the MT48H8M16LFB4-6 IT:K be used in laptops? A: Yes, the MT48H8M16LFB4-6 IT:K can be used in laptops that support DDR3 SO-DIMM memory modules.

  7. Q: Is the MT48H8M16LFB4-6 IT:K compatible with desktop computers? A: No, the MT48H8M16LFB4-6 IT:K is not compatible with desktop computers as it uses the SO-DIMM form factor.

  8. Q: What are some common applications for the MT48H8M16LFB4-6 IT:K? A: The MT48H8M16LFB4-6 IT:K is commonly used in embedded systems, networking equipment, and industrial applications.

  9. Q: Can the MT48H8M16LFB4-6 IT:K be overclocked? A: Overclocking is not recommended for the MT48H8M16LFB4-6 IT:K as it may lead to instability or damage to the module.

  10. Q: Are there any specific temperature requirements for the MT48H8M16LFB4-6 IT:K? A: The MT48H8M16LFB4-6 IT:K has an operating temperature range of 0°C to 95°C, making it suitable for various environments.

Please note that the answers provided here are based on general knowledge and may vary depending on the specific technical requirements and documentation provided by the manufacturer.