Microsemi Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
2N5237
عرض التفاصيل جداول البيانات

2N5237 Transistor

Product Overview

Category:

The 2N5237 is a general-purpose NPN bipolar junction transistor (BJT).

Use:

It is commonly used for amplification and switching of electronic signals in various applications.

Characteristics:

  • Low power dissipation
  • High current gain
  • Medium frequency capability

Package:

The 2N5237 is typically available in a TO-39 metal can package.

Essence:

The transistor is essential for signal amplification and switching in electronic circuits.

Packaging/Quantity:

The 2N5237 is usually packaged individually or in reels, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (VCBO): 60V
  • Collector-Emitter Voltage (VCEO): 40V
  • Emitter-Base Voltage (VEBO): 6V
  • Collector Current (IC): 600mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (ft): 150MHz
  • Operating Temperature Range: -65°C to 200°C

Detailed Pin Configuration

The 2N5237 transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain allows for small base current to control larger collector current.
  • Medium frequency capability makes it suitable for audio and RF applications.
  • Low power dissipation minimizes heat generation.

Advantages

  • Versatile use in amplification and switching circuits.
  • High current gain provides efficient signal control.
  • Suitable for medium frequency applications.

Disadvantages

  • Limited power dissipation may restrict use in high-power applications.
  • Relatively low voltage ratings compared to some modern transistors.

Working Principles

The 2N5237 operates as a current-controlled switch or amplifier. When a small current flows into the base, it controls a larger current flow between the collector and emitter, allowing for signal amplification or switching.

Detailed Application Field Plans

The 2N5237 is commonly used in the following applications: - Audio amplifiers - RF signal amplification - Switching circuits

Detailed and Complete Alternative Models

Alternative models to the 2N5237 include: - 2N3904 - BC547 - 2N2222

In conclusion, the 2N5237 transistor is a versatile component with applications in amplification and switching circuits across various industries. Its characteristics make it suitable for medium frequency applications, although its limitations should be considered when selecting it for specific designs.

[Word Count: 345]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 2N5237 في الحلول التقنية

  1. What is the 2N5237 transistor used for?

    • The 2N5237 is a general-purpose NPN bipolar junction transistor commonly used for amplification and switching applications.

  2. What are the key specifications of the 2N5237 transistor?

    • The 2N5237 transistor typically has a maximum collector current of 800mA, a maximum collector-emitter voltage of 40V, and a maximum power dissipation of 625mW.

  3. How can the 2N5237 transistor be used in an amplifier circuit?

    • The 2N5237 can be used as a small-signal amplifier in audio or other low-power applications due to its moderate gain and low noise characteristics.

  4. Can the 2N5237 be used for switching applications?

    • Yes, the 2N5237 can be used for low-power switching applications such as driving relays, LEDs, or small motors.

  5. What are the typical operating conditions for the 2N5237 transistor?

    • The 2N5237 is typically operated within a temperature range of -65°C to 200°C and is suitable for use in various electronic circuits.

  6. Are there any common alternative transistors to the 2N5237?

    • Yes, alternatives include the 2N3904, BC547, and 2N2222, which have similar characteristics and can be used in its place in many circuits.

  7. What are the pin configurations of the 2N5237 transistor?

    • The 2N5237 transistor typically has three pins: the emitter, base, and collector, with the emitter being connected to the ground or common reference point in most applications.

  8. What are some typical applications where the 2N5237 is commonly used?

    • The 2N5237 is commonly used in audio amplifiers, signal processing circuits, voltage regulators, and various other low-power electronic applications.

  9. What are the considerations for driving the 2N5237 in a circuit?

    • It is important to ensure that the base current and voltage are within the specified limits to avoid damaging the transistor and to achieve the desired performance.

  10. Where can I find detailed datasheets and application notes for the 2N5237 transistor?

    • Datasheets and application notes for the 2N5237 can be found on semiconductor manufacturer websites, distributor platforms, and electronics component databases.