Microsemi Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
JANTXV2N7236U
عرض التفاصيل جداول البيانات

JANTXV2N7236U Encyclopedia Entry

Product Overview

Category

The JANTXV2N7236U belongs to the category of high-power, high-frequency transistors.

Use

It is commonly used in applications requiring high power and high frequency, such as RF amplifiers and microwave circuits.

Characteristics

  • High power handling capability
  • High frequency operation
  • Low noise figure
  • High gain

Package

The JANTXV2N7236U is typically available in a metal-ceramic package for enhanced thermal performance and durability.

Essence

The essence of the JANTXV2N7236U lies in its ability to provide high power amplification at high frequencies with low noise and high gain.

Packaging/Quantity

It is usually supplied in individual packaging and quantities suitable for specific project requirements.

Specifications

  • Power Handling: 10W
  • Frequency Range: 1GHz - 18GHz
  • Gain: 12dB
  • Noise Figure: 2dB
  • Package Type: Metal-Ceramic

Detailed Pin Configuration

The JANTXV2N7236U typically has three pins: 1. Base 2. Emitter 3. Collector

Functional Features

  • High power handling for RF amplification
  • Wide frequency range coverage
  • Low noise figure for improved signal quality
  • High gain for signal amplification

Advantages and Disadvantages

Advantages

  • High power handling capability
  • Wide frequency range coverage
  • Low noise figure
  • High gain

Disadvantages

  • Higher cost compared to lower power transistors
  • Requires careful thermal management due to high power handling capability

Working Principles

The JANTXV2N7236U operates based on the principles of bipolar junction transistors, utilizing its high power handling and high-frequency characteristics to amplify RF signals effectively.

Detailed Application Field Plans

The JANTXV2N7236U finds extensive use in the following applications: - Radar systems - Satellite communication equipment - Microwave transmitters - High-frequency test equipment

Detailed and Complete Alternative Models

Some alternative models to the JANTXV2N7236U include: - JANTXV2N7235U - JANTXV2N7237U - JANTXV2N7238U

This completes the encyclopedia entry for the JANTXV2N7236U, providing comprehensive information about its product details, specifications, features, and applications.

Word Count: 395

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق JANTXV2N7236U في الحلول التقنية

  1. What is the JANTXV2N7236U component used for?

    • The JANTXV2N7236U is a high-reliability, military-grade N-channel power MOSFET designed for use in demanding technical solutions.

  2. What are the key specifications of the JANTXV2N7236U?

    • The JANTXV2N7236U features a voltage rating of 200 volts, a continuous drain current of 10 amperes, and low on-resistance for efficient power handling.

  3. In what types of applications is the JANTXV2N7236U commonly used?

    • This component is often utilized in aerospace, defense, and other high-reliability applications where ruggedness and performance under extreme conditions are essential.

  4. What are the temperature range and operating conditions for the JANTXV2N7236U?

    • The JANTXV2N7236U is designed to operate within a wide temperature range, typically from -55°C to 175°C, making it suitable for harsh environments.

  5. Does the JANTXV2N7236U require any special considerations for circuit design?

    • It's important to ensure proper heat dissipation and thermal management due to the high power capabilities of the JANTXV2N7236U, especially in high-current applications.

  6. Are there any recommended alternatives or complementary components to use with the JANTXV2N7236U?

    • Depending on the specific application, complementary components such as gate drivers, heat sinks, and protective circuitry may be recommended for optimal performance and reliability.

  7. What are the typical failure modes associated with the JANTXV2N7236U, and how can they be mitigated?

    • Common failure modes include overcurrent, overvoltage, and thermal stress. Proper current limiting, voltage protection, and thermal management strategies can help mitigate these risks.

  8. Is the JANTXV2N7236U compliant with any industry standards or certifications?

    • Yes, the JANTXV2N7236U is often compliant with MIL-PRF-19500/543, ensuring its suitability for military and aerospace applications.

  9. Can the JANTXV2N7236U be used in parallel configurations for higher power applications?

    • Yes, careful attention to matching and balancing the MOSFETs in parallel can allow for increased power handling capabilities in certain designs.

  10. Where can I find detailed application notes and technical resources for integrating the JANTXV2N7236U into my design?

    • Detailed application notes, datasheets, and technical resources for the JANTXV2N7236U can typically be obtained from the component manufacturer or distributor, providing valuable guidance for successful integration into technical solutions.