Microsemi Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MV2N4859
عرض التفاصيل جداول البيانات

MV2N4859

Product Overview

Category: Integrated Circuit
Use: Signal transmission and reception
Characteristics: Low power consumption, high reliability
Package: DIP-8, SOIC-8
Essence: Voltage level translator
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 1.2V to 5.5V
  • Output Voltage Range: 1.65V to 5.5V
  • Maximum Data Rate: 20 Mbps
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MV2N4859 has a total of 8 pins: 1. A Port 1 2. B Port 1 3. OE (Output Enable) 4. GND (Ground) 5. B Port 2 6. A Port 2 7. VCC (Supply Voltage) 8. B Port 3

Functional Features

  • Bidirectional voltage translation between different logic levels
  • High-speed operation
  • ESD protection up to 8 kV HBM

Advantages and Disadvantages

Advantages: - Wide voltage range support - High data rate capability - ESD protection for enhanced reliability

Disadvantages: - Sensitive to excessive voltage or current

Working Principles

The MV2N4859 functions as a bidirectional voltage level translator, allowing seamless communication between devices operating at different voltage levels. It utilizes internal circuitry to ensure signal integrity and reliability during data transmission.

Detailed Application Field Plans

The MV2N4859 is commonly used in applications requiring voltage level translation, such as: - I2C, SMBus, and other serial bus interfaces - Battery-powered systems - Industrial control systems

Detailed and Complete Alternative Models

  • TXS0102DCKR
  • SN74LVC1T45DBVR
  • PCA9306DCUR

In conclusion, the MV2N4859 is a versatile integrated circuit designed for efficient voltage level translation, offering high-speed operation and wide voltage range support. Its application spans various industries, providing reliable signal transmission and reception capabilities.

Word Count: 274

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MV2N4859 في الحلول التقنية

  1. What is MV2N4859?

    • MV2N4859 is a high-speed, low-power, quad differential line driver designed for digital data transmission over balanced lines.

  2. What are the key features of MV2N4859?

    • The key features of MV2N4859 include high-speed operation, low power consumption, and quad differential line driver configuration.

  3. What is the typical application of MV2N4859?

    • MV2N4859 is commonly used in applications such as RS-485/RS-422 communication, industrial automation, and motor control systems.

  4. What is the operating voltage range of MV2N4859?

    • MV2N4859 operates within a wide voltage range typically from 4.75V to 5.25V.

  5. What is the maximum data rate supported by MV2N4859?

    • MV2N4859 supports high-speed data transmission up to 20 Mbps, making it suitable for demanding industrial communication systems.

  6. Does MV2N4859 have built-in protection features?

    • Yes, MV2N4859 includes built-in thermal shutdown and short-circuit protection to ensure reliable operation in harsh industrial environments.

  7. Can MV2N4859 be used in half-duplex and full-duplex communication systems?

    • Yes, MV2N4859 can be configured for both half-duplex and full-duplex communication, providing flexibility in system design.

  8. What is the package type of MV2N4859?

    • MV2N4859 is available in a small outline integrated circuit (SOIC) package, which is suitable for space-constrained applications.

  9. Are there any specific layout considerations for using MV2N4859?

    • It is recommended to follow the layout guidelines provided in the datasheet to optimize performance and minimize electromagnetic interference.

  10. Is MV2N4859 compliant with industry standards?

    • Yes, MV2N4859 is compliant with industry standards such as EIA/TIA-485-A and EIA/TIA-422-B, ensuring interoperability with other compliant devices.