Microsemi Corporation
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
SMBG4747CE3/TR13
عرض التفاصيل جداول البيانات

SMBG4747CE3/TR13

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-223
Essence: Regulates voltage in electronic circuits
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 1.2V to 20V
  • Dropout Voltage: 0.6V at 1A
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact package size

Disadvantages: - Limited maximum output current - Restricted operating temperature range

Working Principles

The SMBG4747CE3/TR13 is a voltage regulator that maintains a stable output voltage despite variations in the input voltage or load conditions. It achieves this by using internal circuitry to adjust the output voltage based on the reference voltage and feedback from the output.

Detailed Application Field Plans

The SMBG4747CE3/TR13 is commonly used in various electronic devices such as: - Battery-powered equipment - Portable consumer electronics - Automotive applications

Detailed and Complete Alternative Models

  1. LM1117MPX-3.3/NOPB
  2. MIC29302WT
  3. LT1763CS8-3.3

This completes the entry for the SMBG4747CE3/TR13, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق SMBG4747CE3/TR13 في الحلول التقنية

  1. What is SMBG4747CE3/TR13?

    • SMBG4747CE3/TR13 is a specific model of SMBG (Surface Mount Bridge Rectifier) diode used in electronic circuits.

  2. What are the electrical specifications of SMBG4747CE3/TR13?

    • The electrical specifications include a maximum repetitive peak reverse voltage of 1000V, a maximum average forward rectified current of 4A, and a maximum forward voltage drop of 1.0V at 4A.

  3. How is SMBG4747CE3/TR13 typically used in technical solutions?

    • SMBG4747CE3/TR13 is commonly used for rectification and voltage regulation in power supplies, battery chargers, and other electronic devices.

  4. What are the temperature and storage conditions for SMBG4747CE3/TR13?

    • The recommended operating temperature range is -55°C to +150°C, and the storage temperature range is -55°C to +150°C.

  5. Does SMBG4747CE3/TR13 require any special handling during assembly?

    • SMBG4747CE3/TR13 should be handled using standard ESD (electrostatic discharge) precautions to prevent damage during assembly.

  6. Are there any recommended soldering techniques for SMBG4747CE3/TR13?

    • Soldering should be done using a soldering iron with a temperature-controlled tip, and the recommended maximum soldering time is 10 seconds at 260°C.

  7. What are the key differences between SMBG4747CE3/TR13 and similar SMBG diode models?

    • SMBG4747CE3/TR13 may have different electrical characteristics, package sizes, or thermal properties compared to other SMBG diode models.

  8. Can SMBG4747CE3/TR13 be used in high-frequency applications?

    • SMBG4747CE3/TR13 is suitable for use in high-frequency applications due to its fast reverse recovery time and low forward voltage drop.

  9. What are the potential failure modes of SMBG4747CE3/TR13 in technical solutions?

    • Potential failure modes may include overcurrent conditions, excessive temperature, or voltage transients beyond the diode's ratings.

  10. Where can I find detailed application notes and reference designs for using SMBG4747CE3/TR13 in technical solutions?

    • Detailed application notes and reference designs can often be found in the product datasheet, manufacturer's website, or application engineering support resources.