Monolithic Power Systems Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MP2312GQ-P
عرض التفاصيل جداول البيانات

MP2312GQ-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: QFN-16
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 6V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP2312GQ-P has a total of 16 pins arranged as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS: Soft-Start Pin
  6. PGND: Power Ground
  7. SW: Switch Node
  8. SW: Switch Node
  9. SW: Switch Node
  10. SW: Switch Node
  11. VOUT: Output Voltage
  12. VOUT: Output Voltage
  13. VOUT: Output Voltage
  14. VOUT: Output Voltage
  15. PGND: Power Ground
  16. VIN: Input Voltage

Functional Features

  • High Efficiency Conversion
  • Low Power Consumption
  • Wide Input Voltage Range
  • Adjustable Output Voltage
  • Overcurrent Protection
  • Thermal Shutdown Protection

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power loss - Wide input voltage range allows for versatile applications - Adjustable output voltage provides flexibility - Overcurrent and thermal shutdown protection enhance reliability

Disadvantages: - Limited maximum output current of 3A - Requires external components for operation

Working Principles

The MP2312GQ-P is a voltage regulator IC that converts an input voltage within the range of 4.5V to 18V into a regulated output voltage between 0.8V and 6V. It achieves high efficiency by utilizing a switching regulator topology. The IC incorporates various protection features such as overcurrent and thermal shutdown to ensure safe operation.

Detailed Application Field Plans

The MP2312GQ-P is commonly used in applications where efficient power management is required. Some potential application fields include:

  1. Portable Electronic Devices
  2. Battery-Powered Systems
  3. Industrial Automation
  4. Automotive Electronics
  5. LED Lighting Systems

Detailed and Complete Alternative Models

  1. MP2307DN: Similar voltage regulator IC with a lower maximum output current of 2A.
  2. MP2359HV: Voltage regulator IC with a higher input voltage range of up to 60V.
  3. MP1482DS: Step-down converter IC with adjustable output voltage and higher maximum output current of 5A.

These alternative models offer different specifications and features, allowing users to choose the most suitable option for their specific requirements.

Word count: 314 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MP2312GQ-P في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MP2312GQ-P in technical solutions:

  1. Question: What is the input voltage range for MP2312GQ-P?
    Answer: The input voltage range for MP2312GQ-P is typically between 4.5V and 18V.

  2. Question: What is the output voltage range for MP2312GQ-P?
    Answer: The output voltage range for MP2312GQ-P can be adjusted from 0.6V to 12V.

  3. Question: What is the maximum output current of MP2312GQ-P?
    Answer: MP2312GQ-P can provide a maximum output current of 3A.

  4. Question: Does MP2312GQ-P have built-in overcurrent protection?
    Answer: Yes, MP2312GQ-P features overcurrent protection to safeguard against excessive current draw.

  5. Question: Can MP2312GQ-P operate in a wide temperature range?
    Answer: Yes, MP2312GQ-P is designed to operate in a temperature range of -40°C to +85°C.

  6. Question: Is MP2312GQ-P suitable for battery-powered applications?
    Answer: Yes, MP2312GQ-P is highly efficient and can be used in battery-powered applications.

  7. Question: Does MP2312GQ-P support synchronous rectification?
    Answer: Yes, MP2312GQ-P utilizes synchronous rectification to improve efficiency.

  8. Question: Can MP2312GQ-P be used in automotive applications?
    Answer: Yes, MP2312GQ-P meets the requirements for automotive applications and has a wide input voltage range.

  9. Question: Does MP2312GQ-P have a shutdown mode?
    Answer: Yes, MP2312GQ-P has a shutdown mode that reduces power consumption when not in use.

  10. Question: Is MP2312GQ-P RoHS compliant?
    Answer: Yes, MP2312GQ-P is RoHS compliant, ensuring it meets environmental standards.

Please note that these answers are general and may vary depending on the specific application and usage scenario.