Monolithic Power Systems Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MP26085DJ-LF-P
عرض التفاصيل جداول البيانات

MP26085DJ-LF-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: QFN-16

Detailed Pin Configuration

The MP26085DJ-LF-P has a QFN-16 package with the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. PGND: Power ground pin
  7. SW: Switching pin
  8. BST: Boost pin
  9. COMP: Compensation pin
  10. SS: Soft-start pin
  11. AGND: Analog ground pin
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency conversion for reduced power loss
  • Compact size for space-constrained designs
  • Low power consumption for improved energy efficiency
  • Enable pin for easy on/off control
  • Feedback pin for precise output voltage regulation
  • Soft-start pin for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency operation saves energy - Compact size allows for flexible integration - Wide input voltage range accommodates various power sources - Precise output voltage regulation ensures stable performance

Disadvantages: - Limited maximum output current of 1.5A - Operating temperature range may not be suitable for extreme environments

Working Principles

The MP26085DJ-LF-P is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves this through a combination of switching and control circuitry, ensuring efficient power conversion with minimal loss. The enable pin allows for easy on/off control, while the feedback pin ensures precise output voltage regulation.

Detailed Application Field Plans

The MP26085DJ-LF-P is commonly used in various applications, including but not limited to:

  1. Portable electronic devices: Provides regulated power supply for smartphones, tablets, and portable gaming consoles.
  2. IoT devices: Suitable for powering sensors, wireless modules, and microcontrollers in Internet of Things (IoT) applications.
  3. Battery-powered systems: Enables efficient power management in battery-operated devices such as wearables, remote controls, and medical devices.
  4. Industrial automation: Used in control systems, motor drives, and other industrial equipment requiring stable and efficient power supply.

Detailed and Complete Alternative Models

  1. MP26086DJ-LF-P: Similar to MP26085DJ-LF-P with higher maximum output current of 2A.
  2. MP26084DJ-LF-P: Similar to MP26085DJ-LF-P with lower maximum output current of 1A.
  3. MP26087DJ-LF-P: Similar to MP26085DJ-LF-P with extended operating temperature range of -40°C to +105°C.

(Note: The above alternative models are for illustrative purposes only and may not represent the complete range of alternatives available.)

This concludes the encyclopedia entry for MP26085DJ-LF-P, providing an overview of its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MP26085DJ-LF-P في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MP26085DJ-LF-P in technical solutions:

  1. Q: What is MP26085DJ-LF-P? A: MP26085DJ-LF-P is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of MP26085DJ-LF-P? A: Some key features of MP26085DJ-LF-P include multiple voltage regulators, high efficiency, low quiescent current, and protection features like overvoltage and overcurrent protection.

  3. Q: What technical solutions can MP26085DJ-LF-P be used in? A: MP26085DJ-LF-P can be used in a wide range of applications such as portable devices, IoT devices, industrial equipment, and automotive electronics.

  4. Q: How many voltage regulators does MP26085DJ-LF-P have? A: MP26085DJ-LF-P has multiple voltage regulators, typically including a buck converter and LDOs (low-dropout regulators).

  5. Q: What is the input voltage range supported by MP26085DJ-LF-P? A: The input voltage range supported by MP26085DJ-LF-P is typically between 2.7V and 5.5V.

  6. Q: What is the output voltage range provided by MP26085DJ-LF-P? A: The output voltage range provided by MP26085DJ-LF-P depends on the specific configuration but can typically cover a wide range, such as 0.8V to 3.3V.

  7. Q: Does MP26085DJ-LF-P support any special power-saving modes? A: Yes, MP26085DJ-LF-P typically supports power-saving modes like pulse skipping mode and low-power shutdown mode to optimize efficiency.

  8. Q: What protection features does MP26085DJ-LF-P offer? A: MP26085DJ-LF-P offers various protection features such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown protection.

  9. Q: Can MP26085DJ-LF-P be used in battery-powered applications? A: Yes, MP26085DJ-LF-P is suitable for battery-powered applications due to its low quiescent current and efficient power management capabilities.

  10. Q: Is MP26085DJ-LF-P a surface-mount device (SMD)? A: Yes, MP26085DJ-LF-P is typically available in a surface-mount package, making it suitable for automated assembly processes.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and datasheet for MP26085DJ-LF-P.