Monolithic Power Systems Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MP86884DQKT-P
عرض التفاصيل جداول البيانات

MP86884DQKT-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: QFN (Quad Flat No-Lead)
  • Essence: Regulates and controls power supply in electronic devices
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 30µA

Detailed Pin Configuration

The MP86884DQKT-P has a total of 16 pins arranged as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS: Soft-start pin
  6. PG: Power Good pin
  7. VOUT: Output voltage pin
  8. SW: Switching node pin
  9. AGND: Analog ground pin
  10. COMP: Compensation pin
  11. BST: Bootstrap pin
  12. LX: Inductor connection pin
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. VCC: Supply voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low quiescent current enables energy-saving operation
  • Soft-start feature prevents excessive inrush current
  • Power Good pin provides status indication
  • Over-temperature protection ensures safe operation

Advantages and Disadvantages

Advantages

  • High efficiency results in longer battery life
  • Wide input voltage range allows for compatibility with various power sources
  • Compact QFN package saves board space
  • Power Good pin provides convenient status monitoring

Disadvantages

  • Maximum output current limited to 1A
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The MP86884DQKT-P is a buck converter IC that utilizes pulse-width modulation (PWM) to regulate the output voltage. It operates by switching the input voltage on and off at a high frequency, which is then filtered and smoothed to provide a stable output voltage. The feedback mechanism continuously adjusts the duty cycle of the switching signal to maintain the desired output voltage.

Detailed Application Field Plans

The MP86884DQKT-P is commonly used in various electronic devices that require efficient power management. Some potential application fields include:

  1. Portable electronic devices (e.g., smartphones, tablets)
  2. Battery-powered devices (e.g., wearables, IoT devices)
  3. Industrial control systems
  4. Automotive electronics
  5. Home automation systems

Detailed and Complete Alternative Models

  1. MP86912DQKT-P: Similar specifications, higher maximum output current (1.5A)
  2. MP86789DQKT-P: Similar specifications, lower quiescent current (20µA)
  3. MP86532DQKT-P: Similar specifications, wider input voltage range (2.5V to 6V)

These alternative models offer similar functionality but may have slight differences in performance or features.

Word count: 345 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MP86884DQKT-P في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of MP86884DQKT-P in technical solutions:

  1. Question: What is the MP86884DQKT-P?
    Answer: The MP86884DQKT-P is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Question: What are the key features of the MP86884DQKT-P?
    Answer: The MP86884DQKT-P offers features such as multiple voltage regulators, power sequencing, fault protection, and high efficiency.

  3. Question: What applications can the MP86884DQKT-P be used in?
    Answer: The MP86884DQKT-P can be used in a wide range of applications including industrial automation, consumer electronics, automotive systems, and more.

  4. Question: How many voltage regulators does the MP86884DQKT-P have?
    Answer: The MP86884DQKT-P has multiple voltage regulators, typically including buck converters, boost converters, and LDOs (low-dropout regulators).

  5. Question: Can the MP86884DQKT-P handle high current loads?
    Answer: Yes, the MP86884DQKT-P is designed to handle high current loads, making it suitable for power-hungry devices or systems.

  6. Question: Does the MP86884DQKT-P support power sequencing?
    Answer: Yes, the MP86884DQKT-P supports power sequencing, allowing for controlled startup and shutdown of different power domains.

  7. Question: What kind of fault protection does the MP86884DQKT-P offer?
    Answer: The MP86884DQKT-P provides various fault protection features like overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Question: Is the MP86884DQKT-P highly efficient?
    Answer: Yes, the MP86884DQKT-P is designed for high efficiency, helping to minimize power losses and maximize battery life in portable devices.

  9. Question: Can the MP86884DQKT-P be used in automotive applications?
    Answer: Yes, the MP86884DQKT-P is suitable for automotive applications, meeting the necessary requirements for reliability and performance.

  10. Question: Where can I find more information about the MP86884DQKT-P?
    Answer: You can find more detailed information about the MP86884DQKT-P in the datasheet provided by the manufacturer or by contacting their technical support team.