MPQ2735GG-P

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: QFN-16
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.6V to 3.3V
• Maximum Output Current: 1A
• Quiescent Current: 30µA
• Switching Frequency: 1.2MHz
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MPQ2735GG-P has a total of 16 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. EN: Enable Pin
3. FB: Feedback Pin
4. GND: Ground
5. SW: Switch Node
6. PGND: Power Ground
7. VOUT: Output Voltage
8. COMP: Compensation Pin
9. SS: Soft-Start Pin
10. BST: Boost Pin
11. AGND: Analog Ground
12. NC: No Connection
13. NC: No Connection
14. NC: No Connection
15. NC: No Connection
16. NC: No Connection

Functional Features

• High Efficiency: The MPQ2735GG-P offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 30µA, the IC ensures minimal power consumption during standby or low-load conditions.
• Wide Input Voltage Range: The IC can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various applications.
• Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, providing flexibility for different system requirements.
• Overcurrent Protection: The MPQ2735GG-P incorporates overcurrent protection to safeguard the circuit and connected devices.

Advantages and Disadvantages

Advantages

• High efficiency power conversion
• Low power consumption during standby
• Wide input voltage range
• Adjustable output voltage
• Overcurrent protection

Disadvantages

• Limited maximum output current (1A)

Working Principles

The MPQ2735GG-P is a voltage regulator IC that utilizes a switching regulator topology. It operates by converting the input voltage to a higher or lower regulated output voltage, depending on the application requirements. The IC uses a high-frequency switching transistor to control the energy flow and maintain the desired output voltage. This switching action allows for efficient power conversion with minimal energy loss.

Detailed Application Field Plans

The MPQ2735GG-P is commonly used in various electronic devices and systems, including:

1. Mobile Phones
2. Tablets
3. Portable Media Players
4. Wearable Devices
5. IoT (Internet of Things) Devices
6. Battery-Powered Systems
7. Embedded Systems

Detailed and Complete Alternative Models

1. MPQ2736GG-P: Similar specifications and features, but with a higher maximum output current of 2A.
2. MPQ2734GG-P: Similar specifications and features, but with a lower maximum output current of 500mA.
3. MPQ2738GG-P: Similar specifications and features, but with additional integrated protection features such as thermal shutdown and short-circuit protection.

(Note: This list is not exhaustive and there may be other alternative models available in the market.)

In conclusion, the MPQ2735GG-P is a voltage regulator IC designed for power management applications. It offers high efficiency, low power consumption, and a wide input voltage range. While it has a limited maximum output current, it provides overcurrent protection to ensure the safety of the circuit and connected devices. The IC finds applications in various electronic devices and systems, and there are alternative models available with different specifications and features.