قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
74AUP1T17GWH

Encyclopedia Entry: 74AUP1T17GWH

Product Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Shifter
  • Characteristics: High-speed, low-power consumption, single-gate package
  • Package: SOT353 (SC-88A), SOT753 (DFN1006-3)
  • Essence: Transistor-based voltage level shifter
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

The 74AUP1T17GWH is a logic level shifter integrated circuit designed for voltage translation applications. It operates at high speeds while consuming minimal power. The IC is available in two package options: SOT353 (SC-88A) and SOT753 (DFN1006-3). Each package contains 3000 units in tape and reel packaging.

Detailed Pin Configuration

The 74AUP1T17GWH features a single gate with the following pin configuration:

  • Pin 1: Input (A)
  • Pin 2: Output (Y)
  • Pin 3: Voltage Supply (VCC)
  • Pin 4: Ground (GND)

Functional Features

The main function of the 74AUP1T17GWH is to shift the voltage level of a digital signal from one logic level to another. It can convert a low-level input signal to a higher-level output signal or vice versa. This makes it suitable for interfacing between devices operating at different voltage levels.

Advantages and Disadvantages

Advantages: - High-speed operation - Low power consumption - Small package size - Wide operating voltage range - Easy integration into various electronic systems

Disadvantages: - Limited number of input/output pins - Not suitable for bidirectional voltage level shifting

Working Principles

The 74AUP1T17GWH utilizes transistor-based circuitry to perform voltage level shifting. It employs a combination of MOSFETs and resistors to achieve the desired voltage translation. The input signal is amplified and adjusted to match the required output voltage level.

Detailed Application Field Plans

The 74AUP1T17GWH finds applications in various electronic systems where voltage level shifting is required. Some potential application fields include:

  1. Microcontrollers: Interface between microcontrollers operating at different voltage levels.
  2. Communication Systems: Level shifting between different communication protocols.
  3. Sensor Networks: Voltage translation for sensor nodes with varying voltage requirements.
  4. Battery-Powered Devices: Efficiently convert voltage levels in portable electronic devices.

Detailed and Complete Alternative Models

  1. SN74LVC1T45: Single-bit dual-supply bus transceiver
  2. NC7SZ17: TinyLogic UHS buffer with open-drain outputs
  3. TC7WU04FU: Single inverter buffer with open-drain output

These alternative models offer similar functionality and can be used as substitutes for the 74AUP1T17GWH in voltage level shifting applications.

Word Count: 275

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 74AUP1T17GWH في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of 74AUP1T17GWH in technical solutions:

Q1: What is the 74AUP1T17GWH? A1: The 74AUP1T17GWH is a single buffer/driver with open-drain output, designed for use in various digital applications.

Q2: What is the voltage range supported by the 74AUP1T17GWH? A2: The 74AUP1T17GWH supports a wide voltage range from 0.8V to 3.6V.

Q3: Can the 74AUP1T17GWH be used as a level shifter? A3: Yes, the 74AUP1T17GWH can be used as a level shifter to convert signals between different voltage levels.

Q4: What is the maximum output current of the 74AUP1T17GWH? A4: The 74AUP1T17GWH has a maximum output current of 32mA.

Q5: Is the 74AUP1T17GWH suitable for high-speed applications? A5: Yes, the 74AUP1T17GWH is designed for high-speed operation and can be used in applications with fast switching requirements.

Q6: Can the 74AUP1T17GWH be used in both push-pull and open-drain configurations? A6: No, the 74AUP1T17GWH is specifically designed for open-drain output configuration only.

Q7: What is the typical propagation delay of the 74AUP1T17GWH? A7: The typical propagation delay of the 74AUP1T17GWH is around 2.5ns.

Q8: Can the 74AUP1T17GWH be used in battery-powered applications? A8: Yes, the 74AUP1T17GWH operates at low power supply voltages and is suitable for battery-powered applications.

Q9: Does the 74AUP1T17GWH have built-in ESD protection? A9: Yes, the 74AUP1T17GWH has built-in ESD protection to safeguard against electrostatic discharge events.

Q10: What package options are available for the 74AUP1T17GWH? A10: The 74AUP1T17GWH is available in various package options, including SOT353 and XSON6.