NXP USA Inc.
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
74ABT620D,623
عرض التفاصيل جداول البيانات

Encyclopedia Entry: 74ABT620D,623

Product Overview

Category

The 74ABT620D,623 belongs to the category of integrated circuits (ICs) and specifically falls under the family of ABT series logic devices.

Use

This product is commonly used in digital systems for various applications such as data storage, signal processing, and control circuits. It serves as a buffer/register with 3-state outputs.

Characteristics

  • High-speed operation: The 74ABT620D,623 offers fast switching times, making it suitable for time-critical applications.
  • Low power consumption: This IC is designed to minimize power consumption, ensuring energy efficiency.
  • Wide operating voltage range: It can operate within a broad voltage range, typically between 4.5V and 5.5V.
  • 3-state outputs: The device provides three output states - high impedance, logic high, and logic low - allowing for flexible signal routing.

Package

The 74ABT620D,623 is available in a standard dual in-line package (DIP), which consists of 20 pins arranged in two rows of ten.

Essence

The essence of this product lies in its ability to provide reliable and efficient buffering and register functionality in digital systems.

Packaging/Quantity

The 74ABT620D,623 is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: ABT
  • Logic Type: Buffer/Register
  • Number of Pins: 20
  • Pin Configuration: Detailed pin configuration provided below

Pin Configuration

The 74ABT620D,623 features the following pin configuration:

  1. OE (Output Enable)
  2. A0 (Data Input A0)
  3. A1 (Data Input A1)
  4. A2 (Data Input A2)
  5. A3 (Data Input A3)
  6. A4 (Data Input A4)
  7. A5 (Data Input A5)
  8. A6 (Data Input A6)
  9. A7 (Data Input A7)
  10. GND (Ground)
  11. B7 (Data Input B7)
  12. B6 (Data Input B6)
  13. B5 (Data Input B5)
  14. B4 (Data Input B4)
  15. B3 (Data Input B3)
  16. B2 (Data Input B2)
  17. B1 (Data Input B1)
  18. B0 (Data Input B0)
  19. VCC (Supply Voltage)
  20. Q0-Q7 (Data Output)

Functional Features

The 74ABT620D,623 offers the following functional features:

  • Bidirectional data transfer: It allows data to be transferred bidirectionally between the A and B inputs.
  • Output enable control: The OE pin enables or disables the outputs, providing flexibility in controlling the flow of data.
  • 3-state outputs: The device supports three output states - high impedance, logic high, and logic low - facilitating bus sharing and reducing contention.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data processing.
  • Low power consumption contributes to energy efficiency.
  • Wide operating voltage range enhances compatibility with various systems.
  • 3-state outputs allow for flexible signal routing and bus sharing.

Disadvantages

  • Limited number of data inputs (A0-A7 and B0-B7).
  • May require additional components for specific applications.

Working Principles

The 74ABT620D,623 operates based on the principles of digital logic. It utilizes internal circuitry to buffer and register data signals, allowing for bidirectional data transfer between the A and B inputs. The output enable control (OE) pin determines whether the outputs are active or in a high impedance state.

Detailed Application Field Plans

The 74ABT620D,623 finds application in various digital systems, including but not limited to: - Microprocessors and microcontrollers - Memory modules - Communication systems - Control circuits - Data acquisition systems

Its buffering and register functionality makes it suitable for scenarios where efficient data transfer and signal routing are crucial.

Alternative Models

Several alternative models with similar functionality to the 74ABT620D,623 are available in the market. Some notable alternatives include: - 74ACT620 - 74HC620 - 74LS620

These alternatives offer comparable features and can be considered as substitutes depending on specific requirements.

In conclusion, the

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 74ABT620D,623 في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of 74ABT620D and 74ABT623 in technical solutions:

  1. Q: What is the function of the 74ABT620D and 74ABT623?
    A: The 74ABT620D is an octal bus transceiver with 3-state outputs, while the 74ABT623 is an octal bus transceiver with 3-state inputs and outputs.

  2. Q: What is the voltage supply range for these ICs?
    A: The 74ABT620D and 74ABT623 operate within a voltage supply range of 4.5V to 5.5V.

  3. Q: Can these ICs be used for bidirectional data transfer?
    A: Yes, both the 74ABT620D and 74ABT623 support bidirectional data transfer.

  4. Q: What is the maximum data transfer rate supported by these ICs?
    A: These ICs can handle data transfer rates up to 200 MHz.

  5. Q: How many bits can be transferred simultaneously using these ICs?
    A: Both the 74ABT620D and 74ABT623 can transfer 8 bits simultaneously.

  6. Q: Do these ICs have built-in protection against bus contention?
    A: Yes, these ICs have built-in bus-hold circuitry that provides protection against bus contention.

  7. Q: Can these ICs be cascaded to increase the number of bits transferred?
    A: Yes, multiple 74ABT620D or 74ABT623 ICs can be cascaded to increase the number of bits transferred.

  8. Q: Are these ICs compatible with TTL logic levels?
    A: Yes, the 74ABT620D and 74ABT623 are compatible with TTL logic levels.

  9. Q: Can these ICs be used in high-speed applications?
    A: Yes, these ICs are designed for high-speed operation and can be used in such applications.

  10. Q: What is the power consumption of these ICs?
    A: The power consumption of the 74ABT620D and 74ABT623 is relatively low, making them suitable for power-sensitive applications.

Please note that these answers are general and may vary depending on specific application requirements.