PCA9509ADP,118

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: I/O Expander
• Characteristics: Low-voltage 16-bit I2C-bus and SMBus I/O expander with interrupt output, reset input, and configuration registers
• Package: TSSOP-24
• Essence: The PCA9509ADP,118 is a versatile I/O expander IC that provides additional input/output ports for microcontrollers or other devices.
• Packaging/Quantity: Available in tape and reel packaging, with 2500 units per reel.

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• Number of I/O Ports: 16
• I2C-bus Frequency: Up to 400 kHz
• Interrupt Output: Open-drain active-low output
• Reset Input: Active-low reset input
• Configuration Registers: Allows customization of various features and settings

Detailed Pin Configuration

The PCA9509ADP,118 has a total of 24 pins in a TSSOP package. The pin configuration is as follows:

Pin 1: SDA - Serial Data Line Pin 2: SCL - Serial Clock Line Pin 3: INT - Interrupt Output Pin 4: RESET - Reset Input Pin 5-20: P0-P15 - General Purpose I/O Ports Pin 21: VDD - Supply Voltage Pin 22: GND - Ground Pin 23: A0 - Address Bit 0 Pin 24: A1 - Address Bit 1

Functional Features

• Expandable I/O Ports: Provides 16 additional I/O ports for the host device.
• I2C-bus/SMBus Compatible: Supports communication over the popular I2C-bus and SMBus protocols.
• Interrupt Output: Generates an interrupt signal to the host device when a specified event occurs.
• Reset Input: Allows the host device to reset the I/O expander.
• Configuration Registers: Enables customization of various features, such as input/output direction, polarity inversion, and pull-up resistors.

Advantages and Disadvantages

Advantages: - Provides additional I/O ports without requiring extra pins on the host device. - Compatible with popular communication protocols. - Configurable settings allow flexibility in usage. - Low-voltage operation supports a wide range of applications.

Disadvantages: - Limited number of I/O ports (16). - Requires I2C-bus or SMBus support on the host device.

Working Principles

The PCA9509ADP,118 operates by communicating with the host device through the I2C-bus or SMBus. The host device sends commands and data to the I/O expander, which then controls the input/output ports accordingly. The interrupt output can be used to notify the host device of specific events, while the reset input allows the host device to reset the I/O expander if needed. The configuration registers provide flexibility in customizing the behavior of the I/O expander.

Detailed Application Field Plans

The PCA9509ADP,118 finds applications in various fields, including but not limited to: 1. Industrial Automation: Provides additional I/O ports for controlling sensors, actuators, and other devices in industrial automation systems. 2. Consumer Electronics: Used to expand the number of input/output ports in devices such as smart home controllers, gaming consoles, and audio/video equipment. 3. Automotive: Enables the connection of additional peripherals and sensors in automotive applications, such as infotainment systems and vehicle control units. 4. Internet of Things (IoT): Facilitates the integration of multiple sensors and actuators in IoT devices, allowing for enhanced connectivity and functionality.

Detailed and Complete Alternative Models

1. PCA9554APW,118: 8-bit I2C-bus and SMBus I/O expander with interrupt output and reset input.
2. MCP23017-E/SP: 16-bit I2C-bus I/O expander with interrupt output and cascading feature.
3. MAX7313ATG+: 16-bit I2C-bus I/O expander with interrupt output and configurable polarity inversion.

These alternative models offer similar functionality to the PCA9509ADP,118 and can be considered as alternatives based on specific requirements and preferences.

Word count: 498 words