PCA9672BS,118 belongs to the category of integrated circuits (ICs).
This product is commonly used for controlling and driving LEDs in various applications.
The PCA9672BS,118 is available in a small outline package (SOT96-1) with 24 pins.
The essence of PCA9672BS,118 lies in its ability to expand the number of available I/O pins on a microcontroller or other devices, allowing for efficient control of multiple LEDs or other devices.
The PCA9672BS,118 is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.
The PCA9672BS,118 has a total of 24 pins. The pin configuration is as follows:
The PCA9672BS,118 operates by receiving commands and data through the I2C-bus interface. It interprets these commands to control the state of its 16 output pins. Each output pin can be independently set to either a high-impedance state or an active-low state, allowing for control of LEDs or other devices connected to these pins.
The PCA9672BS,118 finds applications in various fields, including but not limited to:
These alternative models offer similar functionality and can be considered as alternatives to the PCA9672BS,118 based on specific application requirements.
*Note: The
Sure! Here are 10 common questions and answers related to the application of PCA9672BS,118:
1. What is PCA9672BS,118? PCA9672BS,118 is a general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the I2C-bus interface.
2. What is the maximum number of I/Os supported by PCA9672BS,118? PCA9672BS,118 supports up to 16 I/Os, which can be configured as inputs or outputs.
3. How do I communicate with PCA9672BS,118? PCA9672BS,118 uses the I2C-bus interface for communication. You can connect it to your microcontroller using the SDA (data) and SCL (clock) lines.
4. Can I use multiple PCA9672BS,118 devices in my project? Yes, you can use multiple PCA9672BS,118 devices in your project. Each device needs a unique I2C address, which can be set using the A0, A1, and A2 pins on the chip.
5. What voltage levels does PCA9672BS,118 support? PCA9672BS,118 supports a wide range of voltage levels from 1.65V to 5.5V, making it compatible with most microcontrollers.
6. Can I use PCA9672BS,118 with both 3.3V and 5V microcontrollers? Yes, PCA9672BS,118 is compatible with both 3.3V and 5V microcontrollers. It can operate at the same voltage level as your microcontroller.
7. How much current can each I/O pin sink/source? Each I/O pin of PCA9672BS,118 can sink/source up to 25mA of current.
8. Can I use PCA9672BS,118 for driving LEDs? Yes, PCA9672BS,118 is commonly used for driving LEDs. Its high current sink/source capability makes it suitable for LED applications.
9. Does PCA9672BS,118 have built-in pull-up resistors? Yes, PCA9672BS,118 has built-in programmable pull-up resistors that can be enabled or disabled for each I/O pin individually.
10. Is there any example code available for using PCA9672BS,118? Yes, many microcontroller manufacturers provide example code and libraries for interfacing with PCA9672BS,118. You can refer to the documentation and resources provided by your microcontroller manufacturer for specific examples.
Please note that these answers are general and may vary depending on the specific implementation and requirements of your project.