PN2907A,116

Product Overview

Use

It is commonly used as a general-purpose amplifier or switch in various electronic circuits.

Characteristics

Low power dissipation
High current gain
Low voltage drop

Package

The PN2907A,116 is typically available in a TO-92 package.

Essence

This transistor is essential for amplifying and switching signals in electronic devices.

Packaging/Quantity

It is usually packaged in reels with a quantity of 1000 units per reel.

Specifications

Collector-Emitter Voltage (VCEO): 60V
Collector-Base Voltage (VCBO): 60V
Emitter-Base Voltage (VEBO): 5V
Collector Current (IC): 600mA
Power Dissipation (PD): 625mW
Transition Frequency (fT): 250MHz

Detailed Pin Configuration

The PN2907A,116 has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

High current gain
Low saturation voltage
Fast switching speed

Advantages

Versatile applications
Reliable performance
Low power dissipation

Disadvantages

Limited maximum current handling capability
Relatively low transition frequency

Working Principles

The PN2907A,116 operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the biasing of the base terminal.

Detailed Application Field Plans

The PN2907A,116 is widely used in the following applications: - Audio amplifiers - Signal amplification circuits - Switching circuits - Voltage regulators

Detailed and Complete Alternative Models

Some alternative models to PN2907A,116 include: - 2N3906 - BC557 - MPSA92 - KSP2907A

In conclusion, the PN2907A,116 PNP bipolar transistor is a versatile component with various applications in electronic circuits. Its high current gain and low power dissipation make it suitable for amplification and switching purposes in a wide range of electronic devices.

[Word count: 298]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PN2907A,116 في الحلول التقنية

What is the PN2907A,116 transistor used for?
- The PN2907A,116 is a general-purpose PNP bipolar junction transistor commonly used for amplification and switching applications.
What are the key specifications of the PN2907A,116 transistor?
- The PN2907A,116 has a maximum collector current (Ic) of 600mA, a maximum collector-emitter voltage (Vce) of 60V, and a maximum power dissipation (Pd) of 625mW.
How do I identify the pinout of the PN2907A,116 transistor?
- The pinout of the PN2907A,116 transistor is typically identified as the emitter (E), base (B), and collector (C) pins.
What are some common applications of the PN2907A,116 transistor?
- Common applications include audio amplification, signal amplification, switching circuits, and voltage regulation.
What are the typical operating conditions for the PN2907A,116 transistor?
- The PN2907A,116 operates within a temperature range of -55°C to 150°C and is suitable for use in various electronic circuits.
How do I calculate the base current and resistor values for driving the PN2907A,116 transistor?
- The base current can be calculated using the desired collector current and the transistor's current gain (hfe). The base resistor value can then be determined using Ohm's law.
Can the PN2907A,116 be used in high-frequency applications?
- While the PN2907A,116 can be used in moderate frequency applications, it may not be suitable for high-frequency designs due to its transition frequency limitations.
What are the considerations for designing a PN2907A,116-based amplifier circuit?
- Considerations include biasing the transistor properly, selecting appropriate coupling and bypass capacitors, and ensuring proper heat dissipation.
Are there any common pitfalls to avoid when using the PN2907A,116 transistor?
- It's important to avoid exceeding the maximum ratings, improper biasing, and inadequate heat sinking to prevent damage to the transistor.
Where can I find detailed application notes and reference designs for the PN2907A,116 transistor?
- Detailed application notes and reference designs can often be found in the manufacturer's datasheet, application guides, and online technical forums.