Omron Automation and Safety
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
PA46-4-300-X

PA46-4-300-X

Product Overview

Category: Electronic Components
Use: Power Amplifier
Characteristics: High power output, compact size
Package: Surface mount
Essence: Provides high power amplification in a small form factor
Packaging/Quantity: Tape and reel packaging, 300 units per reel

Specifications

  • Operating Frequency: 2.4 GHz
  • Power Output: 24 dBm
  • Voltage: 3.3V
  • Current Consumption: 150 mA
  • Gain: 20 dB
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

  1. VCC
  2. GND
  3. RF IN
  4. RF OUT
  5. Enable

Functional Features

  • High power output for increased signal strength
  • Compact size for space-constrained applications
  • Low current consumption for energy efficiency
  • Wide operating temperature range for versatility

Advantages

  • Small form factor
  • High power output
  • Energy efficient

Disadvantages

  • Limited frequency range
  • Sensitive to voltage fluctuations

Working Principles

PA46-4-300-X is a power amplifier designed to take a low-power input signal and increase its power level while maintaining signal integrity. It operates at 2.4 GHz frequency and provides a power output of 24 dBm. The device utilizes a compact design and low current consumption to meet the demands of modern electronic applications.

Detailed Application Field Plans

The PA46-4-300-X is suitable for use in wireless communication systems, such as Wi-Fi routers, access points, and IoT devices. Its high power output and compact size make it ideal for applications where space is limited and strong signal transmission is required.

Detailed and Complete Alternative Models

  1. PA46-4-500-X: Similar characteristics with higher power output
  2. PA46-4-200-X: Lower power output with reduced current consumption
  3. PA46-4-300-Y: Alternate package type with similar specifications

This completes the entry for PA46-4-300-X, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PA46-4-300-X في الحلول التقنية

  1. What is PA46-4-300-X?

    • PA46-4-300-X is a type of polyamide (nylon) material known for its high strength, heat resistance, and chemical resistance.

  2. What are the typical applications of PA46-4-300-X?

    • PA46-4-300-X is commonly used in technical solutions such as automotive components, electrical connectors, industrial machinery parts, and consumer electronics.

  3. What are the key properties of PA46-4-300-X that make it suitable for technical solutions?

    • PA46-4-300-X exhibits excellent mechanical strength, thermal stability, chemical resistance, and dimensional stability, making it ideal for demanding technical applications.

  4. How does PA46-4-300-X compare to other engineering plastics in terms of performance?

    • PA46-4-300-X offers superior mechanical and thermal properties compared to many other engineering plastics, making it a preferred choice for high-performance technical solutions.

  5. What are the temperature limits for using PA46-4-300-X in technical applications?

    • PA46-4-300-X can typically withstand continuous use at temperatures up to 150°C (302°F), with short-term exposure to higher temperatures possible.

  6. Is PA46-4-300-X suitable for outdoor or harsh environmental conditions?

    • Yes, PA46-4-300-X is known for its excellent resistance to UV radiation, moisture, and various chemicals, making it well-suited for outdoor and harsh environments.

  7. Can PA46-4-300-X be easily processed into complex shapes for technical components?

    • Yes, PA46-4-300-X can be injection molded or extruded into complex shapes with good dimensional stability and minimal warpage, allowing for efficient production of technical parts.

  8. Are there any specific design considerations when using PA46-4-300-X in technical solutions?

    • Designers should consider the material's high stiffness, low moisture absorption, and potential for creep under sustained loads when incorporating PA46-4-300-X into technical designs.

  9. Does PA46-4-300-X require any special surface treatments or coatings for certain technical applications?

    • In some cases, surface treatments or coatings may be recommended to enhance adhesion, improve wear resistance, or provide additional protection against specific environmental factors.

  10. Are there any regulatory or compliance considerations when using PA46-4-300-X in technical solutions?

    • Users should ensure that the application complies with relevant industry standards and regulations, particularly regarding safety, environmental impact, and material handling.