راجع المواصفات للحصول على تفاصيل المنتج.
ZX1-LD100A61 2M
Product Overview
Category
The ZX1-LD100A61 2M belongs to the category of laser diodes.
Use
It is used for various applications such as laser printing, laser scanning, and optical communication.
Characteristics
- Wavelength: 1000nm
- Output Power: 100mW
- Operating Temperature: -40°C to +85°C
- Forward Voltage: 2.2V
- Package Type: TO-18 (5.6mm)
Package
The ZX1-LD100A61 2M comes in a TO-18 package and is available in quantities of 1 piece per package.
Essence
The essence of ZX1-LD100A61 2M lies in its high-power output and stable performance.
Specifications
- Wavelength: 1000nm
- Output Power: 100mW
- Threshold Current: 50mA
- Operating Voltage: 2.2V
- Beam Divergence: 9°
Detailed Pin Configuration
The ZX1-LD100A61 2M has a standard 3-pin configuration with the following pinout: 1. Pin 1: Anode 2. Pin 2: Cathode 3. Pin 3: Case
Functional Features
- High output power
- Low threshold current
- Wide operating temperature range
- Compact TO-18 package
Advantages
- High power output for efficient performance
- Wide operating temperature range for versatility
- Compact package for easy integration
Disadvantages
- Higher forward voltage compared to some alternative models
- Limited beam divergence angle
Working Principles
The ZX1-LD100A61 2M operates based on the principle of stimulated emission of photons within a semiconductor material, resulting in the generation of coherent light at a specific wavelength.
Detailed Application Field Plans
The ZX1-LD100A61 2M is suitable for use in the following applications: - Laser printing and imaging - Laser scanning and ranging - Optical communication systems
Detailed and Complete Alternative Models
Some alternative models to ZX1-LD100A61 2M include: - ZX2-LD110B62 2M - YX1-LD105A60 2M - TX3-LD101C63 2M
In conclusion, the ZX1-LD100A61 2M laser diode offers high power output and versatile applications, making it a valuable component in various optical systems.
Word Count: 311
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق ZX1-LD100A61 2M في الحلول التقنية
Sure, here are 10 common questions and answers related to the application of ZX1-LD100A61 2M in technical solutions:
What is the operating voltage range for ZX1-LD100A61 2M?
- The operating voltage range for ZX1-LD100A61 2M is 3.0V to 3.6V.
What is the typical data rate supported by ZX1-LD100A61 2M?
- The typical data rate supported by ZX1-LD100A61 2M is 2Mbps.
What is the maximum transmission range of ZX1-LD100A61 2M?
- The maximum transmission range of ZX1-LD100A61 2M is approximately 100 meters in open space.
Does ZX1-LD100A61 2M support multiple frequency channels?
- Yes, ZX1-LD100A61 2M supports 40 frequency channels, allowing for interference-free operation in crowded RF environments.
What type of modulation does ZX1-LD100A61 2M use?
- ZX1-LD100A61 2M uses GFSK (Gaussian Frequency Shift Keying) modulation.
Is ZX1-LD100A61 2M suitable for battery-powered devices?
- Yes, ZX1-LD100A61 2M is designed for low power consumption, making it suitable for battery-powered devices.
Can ZX1-LD100A61 2M be used in industrial automation applications?
- Yes, ZX1-LD100A61 2M is well-suited for industrial automation applications due to its robust performance and reliability.
What is the typical latency of ZX1-LD100A61 2M?
- The typical latency of ZX1-LD100A61 2M is less than 5 milliseconds.
Does ZX1-LD100A61 2M support over-the-air firmware updates?
- Yes, ZX1-LD100A61 2M supports over-the-air firmware updates, enabling easy maintenance and upgrades.
Are there any specific antenna requirements for ZX1-LD100A61 2M?
- ZX1-LD100A61 2M requires a 50-ohm antenna with an appropriate matching network for optimal performance.
I hope these questions and answers are helpful! Let me know if you need further assistance.