ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
2N5247_J35Z

2N5247_J35Z

Product Overview

Category:

The 2N5247_J35Z belongs to the category of semiconductor devices.

Use:

It is commonly used as a general-purpose PNP transistor in electronic circuits.

Characteristics:

  • Low power dissipation
  • High current gain
  • Low noise

Package:

The 2N5247_J35Z is typically available in TO-92 packaging.

Essence:

This transistor is essential for amplification and switching applications in various electronic devices.

Packaging/Quantity:

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Emitter Voltage (VCEO): 30V
  • Collector-Base Voltage (VCBO): 45V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 100mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (ft): 300MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The 2N5247_J35Z transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages

  • Versatile usage in various electronic circuits
  • Reliable performance
  • Low power dissipation

Disadvantages

  • Limited maximum voltage and current ratings
  • Sensitivity to temperature variations

Working Principles

The 2N5247_J35Z operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small signal at the base terminal.

Detailed Application Field Plans

This transistor is widely used in audio amplifiers, signal processing circuits, and low-power switching applications. It is also employed in sensor interfaces and voltage regulators.

Detailed and Complete Alternative Models

Some alternative models to the 2N5247_J35Z include the BC557, 2N3906, and 2N4403 transistors, which offer similar characteristics and can be used as substitutes in various applications.

In conclusion, the 2N5247_J35Z transistor is a versatile component with a wide range of applications in electronic circuits, offering reliable performance and essential characteristics for amplification and switching purposes.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 2N5247_J35Z في الحلول التقنية

  1. What is the 2N5247_J35Z component used for in technical solutions?

    • The 2N5247_J35Z is a general-purpose NPN transistor commonly used for amplification and switching applications in electronic circuits.

  2. What are the key specifications of the 2N5247_J35Z transistor?

    • The 2N5247_J35Z has a maximum collector current of 100mA, a maximum collector-emitter voltage of 45V, and a power dissipation of 625mW.

  3. Can the 2N5247_J35Z be used for audio amplifier circuits?

    • Yes, the 2N5247_J35Z can be used in low-power audio amplifier circuits due to its amplification capabilities.

  4. Is the 2N5247_J35Z suitable for switching applications?

    • Yes, the 2N5247_J35Z can be used for low-power switching applications due to its moderate current and voltage ratings.

  5. What are the typical operating conditions for the 2N5247_J35Z?

    • The 2N5247_J35Z operates within a temperature range of -65°C to 200°C and is typically used in low to moderate frequency applications.

  6. Does the 2N5247_J35Z require a heat sink for operation?

    • For most applications, the 2N5247_J35Z does not require a heat sink due to its moderate power dissipation rating. However, in high-power applications, a heat sink may be necessary.

  7. Can the 2N5247_J35Z be used in automotive electronics?

    • Yes, the 2N5247_J35Z can be used in automotive electronics for various control and signal processing functions.

  8. What are the common alternatives to the 2N5247_J35Z transistor?

    • Common alternatives to the 2N5247_J35Z include the 2N3904, BC547, and 2N2222 transistors, which have similar characteristics and applications.

  9. Are there any specific considerations for circuit design when using the 2N5247_J35Z?

    • When designing circuits with the 2N5247_J35Z, it's important to consider proper biasing, current limiting, and voltage ratings to ensure reliable operation.

  10. Where can I find detailed application notes for the 2N5247_J35Z transistor?

    • Detailed application notes for the 2N5247_J35Z can be found in the manufacturer's datasheet, as well as in various electronics reference books and online resources.