ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
2N5551_J05Z
عرض التفاصيل جداول البيانات

2N5551_J05Z

Product Overview

Category

The 2N5551_J05Z belongs to the category of bipolar junction transistors (BJTs).

Use

It is commonly used as an amplifier or switch in electronic circuits.

Characteristics

  • Small signal NPN transistor
  • High current gain
  • Low noise
  • Medium power dissipation

Package

The 2N5551_J05Z is typically available in a TO-92 package.

Essence

This transistor is essential for amplifying and switching electronic signals in various applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (VCBO): 160V
  • Collector-Emitter Voltage (VCEO): 160V
  • Emitter-Base Voltage (VEBO): 6V
  • Collector Current (IC): 600mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 150MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The 2N5551_J05Z has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low noise
  • Suitable for low-power amplification applications
  • Reliable switching capabilities

Advantages

  • High current gain allows for small input signals to control larger output signals
  • Low noise makes it suitable for audio applications
  • Versatile and widely available

Disadvantages

  • Limited power dissipation compared to other transistors
  • Moderate operating frequency limits its use in high-frequency applications

Working Principles

The 2N5551_J05Z operates based on the principles of amplification and control of electrical currents. When a small current flows into the base terminal, it controls a larger current flowing between the collector and emitter terminals, allowing for signal amplification or switching.

Detailed Application Field Plans

The 2N5551_J05Z is commonly used in the following applications: - Audio amplifiers - Signal amplification in sensor circuits - Switching circuits in electronic devices

Detailed and Complete Alternative Models

Some alternative models to the 2N5551_J05Z include: - BC547 - 2N3904 - 2N4401 - BC548

In conclusion, the 2N5551_J05Z is a versatile NPN transistor with high current gain and low noise characteristics, making it suitable for various amplification and switching applications in electronic circuits.

Word Count: 366

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 2N5551_J05Z في الحلول التقنية

  1. What is the 2N5551_J05Z transistor used for?

    • The 2N5551_J05Z is a general-purpose PNP bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the typical operating conditions for the 2N5551_J05Z?

    • The 2N5551_J05Z operates with a maximum collector current of 600mA, a collector-base voltage of 160V, and a collector-emitter voltage of 160V.

  3. Can the 2N5551_J05Z be used for audio amplification?

    • Yes, the 2N5551_J05Z can be used for small-signal audio amplification due to its low noise and high gain characteristics.

  4. Is the 2N5551_J05Z suitable for switching applications?

    • Yes, the 2N5551_J05Z can be used for low-power switching applications due to its moderate switching speed and current-handling capabilities.

  5. What are the typical circuit configurations for using the 2N5551_J05Z as an amplifier?

    • The 2N5551_J05Z can be configured in common emitter or common base configurations for amplification purposes.

  6. Are there any specific thermal considerations when using the 2N5551_J05Z?

    • It is important to consider proper heat sinking for the 2N5551_J05Z, especially when operating at higher currents or in elevated temperature environments.

  7. Can the 2N5551_J05Z be used in low-power voltage regulator circuits?

    • Yes, the 2N5551_J05Z can be utilized in low-power voltage regulator circuits due to its ability to handle moderate currents and voltages.

  8. What are the key parameters to consider when designing a circuit with the 2N5551_J05Z?

    • Key parameters include the maximum collector current, power dissipation, gain bandwidth product, and voltage ratings to ensure proper operation and reliability.

  9. Does the 2N5551_J05Z require any special handling during assembly or soldering?

    • Standard ESD (electrostatic discharge) precautions should be followed during handling and assembly to prevent damage to the 2N5551_J05Z.

  10. Are there any common failure modes associated with the 2N5551_J05Z?

    • Common failure modes include thermal runaway under high current conditions and breakdown due to excessive voltage stress. Proper design and operating conditions can mitigate these risks.