ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
2N5551CBU
عرض التفاصيل جداول البيانات

2N5551CBU

Product Overview

The 2N5551CBU belongs to the category of bipolar junction transistors (BJTs). It is commonly used as a general-purpose amplifier in electronic circuits. The transistor exhibits characteristics such as high current gain, low noise, and low power consumption. It is typically packaged in a TO-92 package and is available in various packaging quantities.

Specifications

  • Maximum Collector-Emitter Voltage: 160V
  • Maximum Collector-Base Voltage: 180V
  • Maximum Emitter-Base Voltage: 6V
  • Continuous Collector Current: 600mA
  • Power Dissipation: 625mW
  • Transition Frequency: 150MHz

Detailed Pin Configuration

The 2N5551CBU transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low noise
  • Low power consumption
  • Wide range of operating frequencies

Advantages and Disadvantages

Advantages

  • Versatile applications
  • High current gain
  • Low noise performance

Disadvantages

  • Limited power handling capacity
  • Susceptible to temperature variations

Working Principles

The 2N5551CBU operates based on the principles of amplification and control of electrical signals. When a small current flows into the base terminal, it controls a larger current flowing between the collector and emitter terminals, allowing for signal amplification.

Detailed Application Field Plans

The 2N5551CBU is widely used in audio amplification circuits, signal processing, and sensor interfacing due to its high current gain and low noise characteristics. It is also employed in oscillator circuits and voltage regulators.

Detailed and Complete Alternative Models

Some alternative models to the 2N5551CBU include: - BC547 - 2N3904 - BC548 - 2N2222

In conclusion, the 2N5551CBU is a versatile BJT with applications in various electronic circuits, offering high current gain and low noise performance. Its specifications and characteristics make it suitable for a wide range of amplification and signal processing tasks.

[Word count: 273]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 2N5551CBU في الحلول التقنية

  1. What is the 2N5551CBU transistor used for?

    • The 2N5551CBU is a general-purpose PNP bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the key specifications of the 2N5551CBU?

    • The 2N5551CBU has a maximum collector current (Ic) of 600mA, a maximum collector-base voltage (Vcbo) of 160V, and a maximum emitter-base voltage (Vebo) of 6V.

  3. How can I use the 2N5551CBU as an amplifier?

    • The 2N5551CBU can be used as an amplifier by configuring it in common emitter mode and biasing it appropriately to achieve the desired gain and frequency response.

  4. Can the 2N5551CBU be used for switching applications?

    • Yes, the 2N5551CBU can be used for low-power switching applications due to its moderate current and voltage ratings.

  5. What are the typical operating conditions for the 2N5551CBU?

    • The 2N5551CBU is typically operated within a temperature range of -55°C to 150°C and in ambient conditions with low humidity and minimal exposure to contaminants.

  6. Are there any specific considerations for designing circuits with the 2N5551CBU?

    • When designing circuits with the 2N5551CBU, it's important to consider proper biasing, thermal management, and protection against overcurrent and overvoltage conditions.

  7. What are some common alternatives to the 2N5551CBU?

    • Common alternatives to the 2N5551CBU include the BC557, BC558, and 2N3906 transistors, which have similar characteristics and can be used in comparable applications.

  8. Can the 2N5551CBU be used in audio amplifier circuits?

    • Yes, the 2N5551CBU can be used in low-power audio amplifier circuits, especially in preamplifier stages or small signal amplification.

  9. What are the typical failure modes of the 2N5551CBU?

    • The 2N5551CBU may fail due to overcurrent, overvoltage, thermal stress, or prolonged exposure to harsh environmental conditions.

  10. Where can I find detailed application notes for using the 2N5551CBU in technical solutions?

    • Detailed application notes for the 2N5551CBU can be found in the manufacturer's datasheet, technical reference manuals, and online resources from reputable semiconductor organizations.