ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
2N6488G
عرض التفاصيل جداول البيانات

2N6488G Transistor

Product Overview

Category:

The 2N6488G is a high-power NPN bipolar junction transistor (BJT).

Use:

It is commonly used in power amplification and switching applications.

Characteristics:

  • High power handling capability
  • Low saturation voltage
  • Fast switching speed

Package:

The 2N6488G is typically available in a TO-220 package.

Essence:

This transistor is essential for high-power electronic circuits requiring amplification or switching.

Packaging/Quantity:

The 2N6488G is usually sold in reels or tubes containing multiple units.

Specifications

  • Collector-Base Voltage (VCBO): 140V
  • Collector-Emitter Voltage (VCEO): 140V
  • Emitter-Base Voltage (VEBO): 7V
  • Collector Current (IC): 15A
  • Power Dissipation (PD): 150W
  • Transition Frequency (fT): 30MHz

Detailed Pin Configuration

  1. Base (B)
  2. Collector (C)
  3. Emitter (E)

Functional Features

  • High power amplification capability
  • Fast switching speed
  • Low saturation voltage

Advantages

  • Suitable for high-power applications
  • Low saturation voltage reduces power loss
  • Fast switching speed allows for efficient operation

Disadvantages

  • May require heat sinking due to high power dissipation
  • Limited frequency response compared to some other transistors

Working Principles

The 2N6488G operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small signal at the base terminal, allowing for amplification or switching of larger currents at the collector terminal.

Detailed Application Field Plans

The 2N6488G is commonly used in: - Audio amplifiers - Power supply circuits - Motor control systems - Switching regulators

Detailed and Complete Alternative Models

  • 2N6488: Similar specifications but without the "G" suffix
  • MJL4281A: Complementary NPN transistor with higher power handling capability
  • MJE3055: Lower power NPN transistor suitable for smaller-scale applications

In conclusion, the 2N6488G transistor is a versatile component suitable for high-power amplification and switching applications. Its robust characteristics and wide range of applications make it a valuable asset in various electronic circuits.

[Word count: 314]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 2N6488G في الحلول التقنية

  1. What is the 2N6488G transistor used for?

    • The 2N6488G is a high-power NPN bipolar junction transistor commonly used in power amplifier and switching applications.

  2. What are the key specifications of the 2N6488G transistor?

    • The 2N6488G has a maximum collector current of 15A, a maximum collector-emitter voltage of 80V, and a maximum power dissipation of 200W.

  3. Can the 2N6488G be used in audio amplifier circuits?

    • Yes, the 2N6488G can be used in audio amplifier circuits due to its high power handling capability and low distortion characteristics.

  4. Is the 2N6488G suitable for motor control applications?

    • Yes, the 2N6488G can be used in motor control applications where high current switching is required.

  5. What are the typical operating conditions for the 2N6488G?

    • The 2N6488G is typically operated at a collector current of 10A, a collector-emitter voltage of 60V, and a base current of 1.5A.

  6. Does the 2N6488G require a heat sink for proper operation?

    • Yes, due to its high power dissipation capability, the 2N6488G typically requires a heat sink to ensure proper thermal management.

  7. Can the 2N6488G be used in high-frequency applications?

    • The 2N6488G is not typically recommended for high-frequency applications due to its slower switching speeds compared to specialized RF transistors.

  8. Are there any common failure modes associated with the 2N6488G?

    • Common failure modes for the 2N6488G include thermal runaway under high load conditions and breakdown due to excessive voltage or current.

  9. What are some alternative transistors that can be used in place of the 2N6488G?

    • Alternatives to the 2N6488G include the MJ15003G, 2N3773G, and TIP35C, which offer similar power handling capabilities.

  10. Where can I find detailed application notes for using the 2N6488G in technical solutions?

    • Detailed application notes for the 2N6488G can be found in the manufacturer's datasheet, as well as in technical reference manuals for power electronics and amplifier design.