ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
74LVTH32374GX
عرض التفاصيل جداول البيانات

74LVTH32374GX

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Translator
  • Characteristics: High-speed, low-voltage, and low-power consumption
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Bi-directional voltage level translator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 200MHz
  • Number of Channels: 32
  • Logic Family: LVTH (Low-Voltage TTL with 5V Tolerant Inputs and Outputs)

Detailed Pin Configuration

The 74LVTH32374GX has a total of 48 pins, which are distributed as follows:

  • Pin 1: GND (Ground)
  • Pin 2: D0 (Data Input/Output 0)
  • Pin 3: D1 (Data Input/Output 1)
  • ...
  • Pin 47: D30 (Data Input/Output 30)
  • Pin 48: D31 (Data Input/Output 31)
  • Pin 49: OE (Output Enable)
  • Pin 50: VCC (Supply Voltage)

Functional Features

  • Bi-directional voltage level translation between two different voltage domains
  • Supports bidirectional data flow with non-inverting outputs
  • Provides voltage translation for both high-to-low and low-to-high logic levels
  • Allows interfacing between systems operating at different voltage levels

Advantages

  • High-speed operation enables efficient data transfer
  • Low-voltage operation reduces power consumption
  • 5V tolerant inputs and outputs allow compatibility with legacy TTL devices
  • Wide supply voltage range provides flexibility in various applications

Disadvantages

  • Limited number of channels (32) may not be sufficient for complex systems
  • TSSOP package may require careful handling during assembly and soldering

Working Principles

The 74LVTH32374GX utilizes a combination of MOSFETs and CMOS technology to achieve bi-directional voltage level translation. It employs a voltage divider network and level-shifting circuitry to ensure proper signal translation between different voltage domains.

Detailed Application Field Plans

The 74LVTH32374GX is commonly used in various applications, including: 1. Microcontroller interfacing with different voltage peripherals 2. Communication interfaces between devices operating at different voltage levels 3. Level shifting in mixed-voltage systems 4. Data transmission between different logic families

Detailed and Complete Alternative Models

Some alternative models that provide similar functionality to the 74LVTH32374GX include: 1. SN74LVC8T245: 8-bit bidirectional voltage level translator 2. TXB0108: 8-channel bi-directional level shifter 3. PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator

Note: The above alternatives are just a few examples, and there are several other models available in the market.

In conclusion, the 74LVTH32374GX is a high-speed, low-voltage logic level translator IC. Its bi-directional voltage level translation capability, along with its low-power consumption and wide supply voltage range, make it suitable for various applications requiring interfacing between different voltage domains.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق 74LVTH32374GX في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of 74LVTH32374GX in technical solutions:

  1. Q: What is the function of the 74LVTH32374GX? A: The 74LVTH32374GX is an octal D-type flip-flop with 3-state outputs, which means it can store and transmit data in digital circuits.

  2. Q: What is the voltage range supported by the 74LVTH32374GX? A: The 74LVTH32374GX supports a wide voltage range from 1.65V to 5.5V, making it compatible with various logic levels.

  3. Q: How many flip-flops are there in the 74LVTH32374GX? A: The 74LVTH32374GX consists of 8 individual flip-flops, allowing it to store and manipulate 8 bits of data simultaneously.

  4. Q: Can the 74LVTH32374GX be used for bidirectional data transmission? A: Yes, the 74LVTH32374GX has 3-state outputs, enabling bidirectional data flow when combined with appropriate control signals.

  5. Q: What is the maximum operating frequency of the 74LVTH32374GX? A: The 74LVTH32374GX can operate at high speeds, with a maximum clock frequency of typically 200MHz.

  6. Q: Does the 74LVTH32374GX have any built-in protection features? A: Yes, the 74LVTH32374GX includes ESD protection on all inputs and outputs, ensuring robustness against electrostatic discharge.

  7. Q: Can I cascade multiple 74LVTH32374GX devices together? A: Yes, you can cascade multiple 74LVTH32374GX devices to increase the number of flip-flops and expand your data storage capacity.

  8. Q: What is the power supply voltage required for the 74LVTH32374GX? A: The 74LVTH32374GX operates with a single power supply voltage, typically ranging from 2.7V to 3.6V.

  9. Q: Is the 74LVTH32374GX suitable for use in high-noise environments? A: Yes, the 74LVTH32374GX has a high noise immunity, making it well-suited for applications where noise interference is a concern.

  10. Q: Can I use the 74LVTH32374GX in both commercial and industrial applications? A: Absolutely! The 74LVTH32374GX is designed to meet the requirements of both commercial and industrial applications, offering versatility in its usage.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.