ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BC856BLT3
عرض التفاصيل جداول البيانات

BC856BLT3

Product Overview

Category

BC856BLT3 belongs to the category of small signal transistors.

Use

It is commonly used for amplification and switching of electronic signals in various applications.

Characteristics

  • Low power dissipation
  • High current gain
  • Low noise

Package

The BC856BLT3 comes in a SOT-23 package, which is a small surface-mount transistor package.

Essence

This transistor is essential for low-power electronic circuits and applications requiring signal amplification.

Packaging/Quantity

The BC856BLT3 is typically available in reels with quantities ranging from hundreds to thousands, depending on the supplier.

Specifications

  • Collector-Base Voltage (VCBO): 80V
  • Collector-Emitter Voltage (VCEO): 65V
  • Emitter-Base Voltage (VEBO): 5V
  • Continuous Collector Current (IC): 100mA
  • Total Power Dissipation (PTOT): 250mW
  • Transition Frequency (fT): 100MHz

Detailed Pin Configuration

The BC856BLT3 has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages

  • Small package size
  • Low power dissipation
  • Suitable for low-voltage applications

Disadvantages

  • Limited maximum current handling capability
  • Moderate frequency response

Working Principles

The BC856BLT3 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its terminals to amplify or switch electronic signals.

Detailed Application Field Plans

Audio Amplification

The BC856BLT3 can be used in audio amplification circuits due to its low noise and high current gain characteristics.

Signal Switching

In electronic switches and multiplexers, this transistor can effectively control signal paths due to its fast switching speed.

Sensor Interfaces

For interfacing with sensors that require amplification of weak signals, the BC856BLT3 is suitable due to its low power dissipation.

Detailed and Complete Alternative Models

  • BC846BLT1G
  • BC847BLT1G
  • BC848BLT1G

In summary, the BC856BLT3 is a small signal transistor with versatile applications in low-power electronic circuits, offering high current gain and low power dissipation. While it has limitations in terms of maximum current handling and frequency response, its compact size and functional features make it a valuable component in various electronic designs.

Word Count: 374

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BC856BLT3 في الحلول التقنية

  1. What is the BC856BLT3 transistor used for?

    • The BC856BLT3 is a general-purpose PNP transistor commonly used in amplification and switching applications.

  2. What are the key specifications of the BC856BLT3?

    • The BC856BLT3 has a maximum collector current of 100mA, a maximum collector-emitter voltage of 65V, and a maximum power dissipation of 200mW.

  3. Can the BC856BLT3 be used for audio amplification?

    • Yes, the BC856BLT3 can be used for small-signal audio amplification due to its low noise and high gain characteristics.

  4. Is the BC856BLT3 suitable for switching applications?

    • Yes, the BC856BLT3 can be used for low-power switching applications due to its fast switching speed and moderate current handling capability.

  5. What are the typical operating conditions for the BC856BLT3?

    • The BC856BLT3 operates within a temperature range of -55°C to 150°C and is typically used with a base current of 5mA to 100mA.

  6. Can the BC856BLT3 be used in high-frequency applications?

    • While the BC856BLT3 has moderate frequency capabilities, it may not be suitable for very high-frequency applications due to its transition frequency of around 100MHz.

  7. Does the BC856BLT3 require any special heat sinking or thermal considerations?

    • For most common applications, the BC856BLT3 does not require special heat sinking or thermal considerations due to its low power dissipation.

  8. Are there any recommended alternative transistors to the BC856BLT3?

    • Some alternative transistors to the BC856BLT3 include BC807, 2N3906, and 2N4403, which have similar characteristics and can be used as substitutes in many applications.

  9. What are the typical circuit configurations for using the BC856BLT3?

    • The BC856BLT3 is commonly used in common emitter and common collector configurations for amplification and switching purposes.

  10. Where can I find detailed application notes and reference designs for the BC856BLT3?

    • Detailed application notes and reference designs for the BC856BLT3 can be found in the datasheet provided by the manufacturer, as well as in various electronics engineering resources and forums.