CAT28F010H-12T

Product Overview

Category

The CAT28F010H-12T belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: The CAT28F010H-12T retains stored data even when power is removed.
• High capacity: It has a storage capacity of 1 megabit (128 kilobytes).
• Fast access time: The device operates at a speed of 120 nanoseconds.
• Low power consumption: The CAT28F010H-12T is designed to minimize power usage.
• Reliable: It offers high endurance and data retention capabilities.

Package

The CAT28F010H-12T is available in a standard 32-pin plastic dual in-line package (PDIP).

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The CAT28F010H-12T is typically packaged in reels or tubes, with each containing a specific quantity of devices. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

• Memory Type: Flash EEPROM
• Organization: 128K x 8 bits
• Supply Voltage: 5V
• Access Time: 120 ns
• Operating Temperature Range: -40°C to +85°C
• Erase/Program Cycles: 100,000 minimum
• Data Retention: 20 years minimum

Detailed Pin Configuration

The CAT28F010H-12T has a total of 32 pins. The pin configuration is as follows:

1. A16
2. A14
3. A12
4. A7
5. A6
6. A5
7. A4
8. A3
9. A2
10. A1
11. A0
12. VPP
13. WE#
14. OE#
15. CE#
16. NC
17. DQ0
18. DQ1
19. DQ2
20. DQ3
21. DQ4
22. DQ5
23. DQ6
24. DQ7
25. VCC
26. GND
27. A8
28. A9
29. A11
30. A13
31. A15
32. NC

Functional Features

• Byte-wide access: The CAT28F010H-12T allows data to be read or written on a byte-by-byte basis.
• Chip enable control: The CE# pin enables or disables the device for operation.
• Output enable control: The OE# pin controls the output buffer, allowing data to be read from the device.
• Write enable control: The WE# pin enables or disables write operations.

Advantages and Disadvantages

Advantages

• Non-volatile storage: Data is retained even without power.
• High capacity: Offers ample storage space for various applications.
• Fast access time: Allows for quick retrieval of stored data.
• Low power consumption: Helps conserve energy in electronic systems.
• Reliable: Provides high endurance and long-term data retention.

Disadvantages

• Limited erase/program cycles: The CAT28F010H-12T has a finite number of times it can be erased and programmed.
• Relatively large package size: The 32-pin PDIP package may not be suitable for space-constrained designs.

Working Principles

The CAT28F010H-12T utilizes flash EEPROM technology to store data. It consists of a grid of memory cells that can be electrically programmed and erased. The device uses a combination of transistors and floating gate structures to trap charges, representing the stored data. When reading or writing data, specific voltage levels are applied to the appropriate pins to manipulate the charge levels in the memory cells.

Detailed Application Field Plans

The CAT28F010H-12T is commonly used in various electronic systems that require non-volatile storage. Some typical application fields include:

1. Embedded Systems: The CAT28F010H-12T can be used to store firmware, configuration data, or other critical information in embedded systems such as microcontrollers and industrial control systems.
2. Consumer Electronics: This product finds applications in devices like set-top boxes, digital cameras, and portable media players, where reliable and non-volatile storage is essential.
3. Automotive Electronics: The CAT28F010H-12T can be utilized in automotive applications for storing data related to engine management, infotainment systems, and instrument clusters.
4. Communication Systems: It can be employed in networking equipment, routers, and switches to store firmware and configuration settings.

Detailed and Complete Alternative Models

1. CAT28F010N