ON Semiconductor
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
FSCM0465RGWDTU
عرض التفاصيل جداول البيانات

FSCM0465RGWDTU

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management IC
  • Characteristics: High efficiency, low standby power consumption
  • Package: TO-220F-6L
  • Essence: Switched Mode Power Supply (SMPS) controller
  • Packaging/Quantity: Tray, 500 units per tray

Specifications

  • Input Voltage Range: 85VAC to 265VAC
  • Output Power: Up to 65W
  • Frequency Range: 50Hz to 60Hz
  • Standby Power Consumption: Less than 30mW
  • Operating Temperature Range: -40°C to +105°C

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. CS: Current sense input
  5. HV: High voltage startup circuit
  6. DRAIN: Power switch output

Functional Features

  • High efficiency power conversion
  • Built-in protection features (overload, overvoltage, and overtemperature)
  • Low standby power consumption
  • Wide input voltage range
  • Frequency jittering for reduced EMI emissions

Advantages

  • Compact size and easy integration into various applications
  • High efficiency leads to energy savings
  • Robust protection features ensure system reliability
  • Low standby power consumption meets energy-saving requirements
  • Wide input voltage range allows for global compatibility

Disadvantages

  • Limited output power compared to higher-rated ICs
  • Requires external components for complete power supply design
  • Higher cost compared to non-integrated solutions

Working Principles

The FSCM0465RGWDTU is a switched mode power supply (SMPS) controller that regulates the output voltage by controlling the duty cycle of the power switch. It operates in a quasi-resonant mode, which reduces switching losses and improves efficiency. The controller uses feedback from the FB pin to adjust the duty cycle and maintain a stable output voltage. The CS pin senses the current flowing through the power switch for overcurrent protection. The HV pin provides high voltage startup capability, enabling reliable operation across a wide input voltage range.

Detailed Application Field Plans

The FSCM0465RGWDTU is commonly used in various applications that require efficient power management, such as: - AC/DC adapters - LED lighting systems - Set-top boxes - Audio amplifiers - Home appliances

Detailed and Complete Alternative Models

  1. FSCM0565RGWDTU: Higher power rating (up to 100W), otherwise similar specifications
  2. FSCM0365RGWDTU: Lower power rating (up to 35W), otherwise similar specifications
  3. FSCM0765RGWDTU: Higher power rating (up to 75W), additional features for advanced protection

Note: These alternative models are part of the same series and offer similar functionality with varying power ratings.

Word count: 375 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق FSCM0465RGWDTU في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of FSCM0465RGWDTU in technical solutions:

  1. Q: What is FSCM0465RGWDTU? A: FSCM0465RGWDTU is a specific model number for a power management IC (PMIC) developed by Fairchild Semiconductor.

  2. Q: What are the main features of FSCM0465RGWDTU? A: The main features of FSCM0465RGWDTU include high voltage startup, built-in frequency jittering, over-temperature protection, and over-voltage protection.

  3. Q: In which applications can FSCM0465RGWDTU be used? A: FSCM0465RGWDTU is commonly used in various technical solutions such as power supplies, LED lighting, consumer electronics, and industrial equipment.

  4. Q: What is the input voltage range supported by FSCM0465RGWDTU? A: FSCM0465RGWDTU supports an input voltage range of typically 85VAC to 265VAC.

  5. Q: Can FSCM0465RGWDTU handle high power loads? A: Yes, FSCM0465RGWDTU is designed to handle high power loads up to a certain limit, depending on the specific application and thermal considerations.

  6. Q: Does FSCM0465RGWDTU have any built-in protection mechanisms? A: Yes, FSCM0465RGWDTU incorporates various protection features like over-temperature protection, over-voltage protection, and over-current protection.

  7. Q: Is FSCM0465RGWDTU compatible with other components or microcontrollers? A: Yes, FSCM0465RGWDTU can be easily integrated with other components and microcontrollers in a system, making it suitable for various technical solutions.

  8. Q: What is the typical efficiency of FSCM0465RGWDTU? A: The typical efficiency of FSCM0465RGWDTU is around 85-90%, depending on the operating conditions and load characteristics.

  9. Q: Are there any application notes or reference designs available for FSCM0465RGWDTU? A: Yes, Fairchild Semiconductor provides application notes and reference designs to help engineers in implementing FSCM0465RGWDTU in their technical solutions.

  10. Q: Where can I purchase FSCM0465RGWDTU? A: FSCM0465RGWDTU can be purchased from authorized distributors of Fairchild Semiconductor or through online electronic component suppliers.